Hotcams(installing)

[MXQuadRacer21]

Ok im installing my hotcams intake and exhaust. My question is do both of the cams have to be facing the same direction?

they will be pointing away from each other if you are talking about the cam lobes.

[MXQuadRacer21]

yes I am.. The exhaust cam lobes are facing right(facing the front) and the intake cam lobes are facing straight up, so is this fine?

[Drewltr450]

no they should be facing completly away from eachother. and easier way to figure it out if there are 2 type of indents on the cams were the sprocket is. ( think of a clock) on the exhaust the dots should be facing in a 12 o clock 9 o,clock position. and on the intake they should be facing the 12 and 3 o clock positions. and make sure your engine is on top dead center.

[KingpinsEx]

Drew, how do you like your cam setup? I have heard that hotcams only make one stage for the LTR is this correct? I am looking for a bit more bottom end and was curious if this would help with that problem?