View Full Version : The last two parts i need .....
pdxbigfoot
09-18-2008, 12:57 PM
Are these 2 which are both discontinued from Honda (of course).
Water pump shaft 19241-hb9-000
Shift drum center 24312-hb9-000
They are #7 in both attached micro-fisch plates. I have called all Honda shops in a tri-state area trying to get lucky to no avail.
Anybody able to help me out with some that are in realy good shape??
Thank you for lookin...Jason
pdxbigfoot
09-18-2008, 12:58 PM
#7
pdxbigfoot
09-18-2008, 12:59 PM
Shift drum center
g9901920
09-18-2008, 01:20 PM
try ronayers.com
leager-n-ky
09-18-2008, 05:54 PM
I have a couple of water pump shafts. Dgtrimble594@msn.com
brokenbones
09-18-2008, 06:41 PM
jason,
i will go out to the shop and look
kevin
I just bought a waterpump shaft from servicehonda. I doubt they discontinued them in the last 3 weeks. Have you talked to them at SH?
pdxbigfoot
09-18-2008, 08:25 PM
They were discontinued. The gentleman i talked to was surprised that they would stop making them as they are a fairly high demand part.
PM's and emails sent to brokenbones and leager-n-ky
Thanx guy's
Rich250RRacer
09-18-2008, 09:15 PM
Originally posted by gojk
I just bought a waterpump shaft from servicehonda. I doubt they discontinued them in the last 3 weeks. Have you talked to them at SH?
I just got one about two weeks ago also, no problem. I'd check on that again.
pdxbigfoot
09-18-2008, 09:17 PM
Well thanx you guys. Im going to get on the phone tomorrow and see whats up. Ill let ya know...J
Rich250RRacer
09-18-2008, 09:20 PM
I think the shift drum center from another bike is the same, but doesn't use the same part number. Possibly CR125? I could be VERY wrong on this, but I think the shift drum center from a 450r may also work. For some reason, I think the one from my '04 had notches for six positions, plus neutral.
trx250rider
09-20-2008, 01:22 PM
i also just got one from service honda...i dont think honda would discontinue a part like the impeller shaft..i would call them again..
racerx573
09-20-2008, 02:01 PM
I have about 2 1/2 250R bottom ends... let me know what all you need.
pdxbigfoot
09-20-2008, 02:23 PM
I got all the parts locally from some forum members.
Final assembly starts on Monday...wait till you see this!
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.