View Full Version : Hondas
HondaDude93
09-11-2008, 11:00 AM
how do you take the little plastic clips off that hold the plastics together?
thanks
chris46250r
09-11-2008, 11:09 AM
Pull the center pin up or out then take the rest out.
flat head screw driver. insert in and twsit thje screw driver so the head points vertical. If that dont work wiggle it around while pulling up
quad2xtreme
09-11-2008, 05:44 PM
Originally posted by FoxHondaRider
flat head screw driver. insert in and twsit thje screw driver so the head points vertical. If that dont work wiggle it around while pulling up
I always use two screwdrivers...one on each side.
blacknblue#2
09-11-2008, 07:45 PM
Originally posted by quad2xtreme
I always use two screwdrivers...one on each side.
x2, it saves from chewing up the clip too bad
Originally posted by blacknblue#2
x2, it saves from chewing up the clip too bad
never had a problem, I work quicker with 1 screw driver I can pop those off pretty quick with 1
HondaDude93
09-11-2008, 09:30 PM
thanks for the replys
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.