CHAR250R
09-09-2008, 02:49 PM
2000 Honda 400EX. I don't ride it much, and it doesn't have much time on it. It's got the following parts on it:
22x7x10 Holeshot XC's on the front
20x11x9 Holeshot HD's on the rear
All the tires have about 4 hrs ride time on them
Douglas .190's with OMF race rings front and back
OMF chassis skid plate
PRM swing arm skid plate
Duncan Racing front bumper
Roll Design extended steering stem
Pro Taper CR low bend bars
Power Madd hand protectors
Honda CR250 clutch lever and perch
D.I.D. X ring chain
Sunstar steel sprockets (stock gearing)
Chain and sprockets have about 4 hours ride time
Fresh EBC rear brake pads
Parking brake block off plate
Big Gunn race exhaust (have stock exhaust also)
K&N air filter with outerwear (have stock air filter)
1 extra stock black seat cover (new)
1 extra N-style black gripper seat cover (brand new in the box)
Recent battery.
Extra NGK plugs
New Honda axle bearings, seals and axle lock and jam nut.
I probably have some other small extra parts.
Honda GN4 oil since new.
Oil & filter change after almost every ride. (I think I change the oil more than I ride it)
It has never been wrecked or upside down. I rode it in the snow twice. The motor has never been apart. Does not burn or use oil. The frame is straight, with no cracks. The plastic has some scrathes from normal riding, with no cracks. It needs nothing, just get on it and go.
$2500.00.
Possible trades: 86 Honda 350X, 88 or 89 Honda 250R.
CHAR350X@aol.com
22x7x10 Holeshot XC's on the front
20x11x9 Holeshot HD's on the rear
All the tires have about 4 hrs ride time on them
Douglas .190's with OMF race rings front and back
OMF chassis skid plate
PRM swing arm skid plate
Duncan Racing front bumper
Roll Design extended steering stem
Pro Taper CR low bend bars
Power Madd hand protectors
Honda CR250 clutch lever and perch
D.I.D. X ring chain
Sunstar steel sprockets (stock gearing)
Chain and sprockets have about 4 hours ride time
Fresh EBC rear brake pads
Parking brake block off plate
Big Gunn race exhaust (have stock exhaust also)
K&N air filter with outerwear (have stock air filter)
1 extra stock black seat cover (new)
1 extra N-style black gripper seat cover (brand new in the box)
Recent battery.
Extra NGK plugs
New Honda axle bearings, seals and axle lock and jam nut.
I probably have some other small extra parts.
Honda GN4 oil since new.
Oil & filter change after almost every ride. (I think I change the oil more than I ride it)
It has never been wrecked or upside down. I rode it in the snow twice. The motor has never been apart. Does not burn or use oil. The frame is straight, with no cracks. The plastic has some scrathes from normal riding, with no cracks. It needs nothing, just get on it and go.
$2500.00.
Possible trades: 86 Honda 350X, 88 or 89 Honda 250R.
CHAR350X@aol.com