elkablaster94
09-08-2008, 06:11 AM
Several aftermarket items up for grabs, buyer pays shipping.
PEP 400ex Triple Rate front shocks, valved for a 180 lbs. rider on +3 400ex a-arms. SOLDd
Lonestar +3 400ex a-arms, Candy Blue lowers, chrome uppers, ball joints are fresh, barely and chips on powdercoat. SOLD
Lonestar +2 swingarm, Powdercoat Yamaha Blue, will include bearing carrier and all chain slides. $325
Axis dual adjust rear shock, for 180lbs. rider, basically brand new, ridden on twice and never raced. SOLD
G- Force axle, 2 rides on it, comes with sprocket and hub. SOLD
Lonestar antifade nut, a few months old. SOLD
BCS race motor, 250x bottom end (kick start) 2001 300ex top end w/ web cams, JE piston, porting, decked head. motor has a small oil drip from the clutch side case from when I replaced the fibers, accidentally torqued the case while the reverse lever spring was still exposed, it could probably be fixed with some JB weld. $400 for the motor alone, or $600 for the motor and FCR 38mm carb
Yellow maier plastics, not too scuffed up, small burn where header pipe came in contact with the rear fender, has 250r black hood installed with BCS graphics kit. $200
ITP rear 8x8 beadlocks, yamaha blue rings with black wheels, mounted on maxxis razr tires 90% tread. $200
Stock 300ex wheels, powdercoat black, rolling on maxxis razors with 90% tread. $100
I also have all the stock stuff, the frame is a 1996 300ex frame with tthe 400ex bracket WELDED on, so national guys be aware that this frame is not legal to race in the schoolboy class. PM me for details on any of the stuff.
All parts shipped from 02190
PEP 400ex Triple Rate front shocks, valved for a 180 lbs. rider on +3 400ex a-arms. SOLDd
Lonestar +3 400ex a-arms, Candy Blue lowers, chrome uppers, ball joints are fresh, barely and chips on powdercoat. SOLD
Lonestar +2 swingarm, Powdercoat Yamaha Blue, will include bearing carrier and all chain slides. $325
Axis dual adjust rear shock, for 180lbs. rider, basically brand new, ridden on twice and never raced. SOLD
G- Force axle, 2 rides on it, comes with sprocket and hub. SOLD
Lonestar antifade nut, a few months old. SOLD
BCS race motor, 250x bottom end (kick start) 2001 300ex top end w/ web cams, JE piston, porting, decked head. motor has a small oil drip from the clutch side case from when I replaced the fibers, accidentally torqued the case while the reverse lever spring was still exposed, it could probably be fixed with some JB weld. $400 for the motor alone, or $600 for the motor and FCR 38mm carb
Yellow maier plastics, not too scuffed up, small burn where header pipe came in contact with the rear fender, has 250r black hood installed with BCS graphics kit. $200
ITP rear 8x8 beadlocks, yamaha blue rings with black wheels, mounted on maxxis razr tires 90% tread. $200
Stock 300ex wheels, powdercoat black, rolling on maxxis razors with 90% tread. $100
I also have all the stock stuff, the frame is a 1996 300ex frame with tthe 400ex bracket WELDED on, so national guys be aware that this frame is not legal to race in the schoolboy class. PM me for details on any of the stuff.
All parts shipped from 02190