metalmind342
09-01-2008, 03:09 PM
When i start the quad up its fine, but in the first couple revs (while still cold) a good amount of blue smoke pours out and does so until the bike is completely warmed up. I figure the problem is in the piston rings. This build is now about 4 years old and had 0 problems until this blue smoke. The build is a 416 with stage 2 hot cam.
Now my question is, what do most people do in this situation? Do people just get new rings for it and a gasket kit and call it good? Or would it be wise to hone the sleeve get a new piston, rings and top end gaskets?
Also, i really don't know where to get parts such as the over sized piston and rings, any ideas?
Thanks for all the help
Now my question is, what do most people do in this situation? Do people just get new rings for it and a gasket kit and call it good? Or would it be wise to hone the sleeve get a new piston, rings and top end gaskets?
Also, i really don't know where to get parts such as the over sized piston and rings, any ideas?
Thanks for all the help