3+2 offset rim

[smorris1]

I believe the stock front rim is 4+2 so will a 3+2 make the front end wider?

[underpowered]

stock wheels are 3+2. ot go wider you need a 2+3 wheels. only 1" on either side though.

[ben_400ex]

i might be wrong but i thought stock offset was 4+1 ?

[smorris1]

Well I measured the rim on the outside and the offset there is def 2 in so the inside would have to be 3 unless the stock rim is 6 inches wide which i dont think so. I measured the inside rim and it seems to be 4 in but idk if i measured it right.

stock wheels are between 4:1 and 3:2. 3:2 wheels will make it wider and 4:1 will make it narrower.

[underpowered]

well the difference is a stock wheel is 5.5" wide where an aftermarket wheel is only 5" wide.

to make it wider, as i said you need a 2+3. First number is BS (inside of wheel) 2nd number is on teh outside of the wheel. 2" towards the inside and 3" on the outside.

4+1 will make it narrower. so a 3+2 will be about the same as stock, a 2+3 will make it slightly wider, by about an inch, as i said before.