Taking Out Steering Stem Bearing???

[Sparks425Ex]

How Do I do it? It is the one in the Bottom of the Stem. I need to get everything out cause next week my frame is going out for Pcing.

O yeah. And Do I have to take out the little peices that the Swing Arm pivot bolt go through?

[trx400ex]

once you get the stem out...take the top seal off, then there will be a circlip you have to get out ...it is a pain..then you just take out the bearing and the bottom dust seal...

[400exRacerX]

Use snap ring pliers on the circlip. The whole frame has to be stripped. Nothing on it at all. Remember to take the two seals out that the rear brake pedal ride on.

[Sparks425Ex]

Is there anything else on the Frame that I might have forgotten to take out?


What is everything that needs to eb taken out or off the frame before Pcing.

nothing can be lef ton the frame when it gets pc including the old paint but id amagine that the guy that is doing the pc will prolly do u might want to look inot it that way your not stuck doing it becasue it takes forever to strip a frame
killer