PDA

View Full Version : Oil Change



tobyp
08-26-2008, 07:17 PM
Anyone have a DIY on oil changes link you can send me. I can't seem to find one since the search won't allow less than 4 letter words (oil)

hypersnyper6947
08-26-2008, 08:01 PM
Place oil pan under the shifter, un bolt the oil plug on the bottom left side of the crankcase, after it drains then drain the oil tank (in front of header), there is a bolt on the bottom of it. Then on the right side of the crankcase you can see where the oil filter is, its 2 bolts to remove the cover and then you can replace it, make sure to not over tighten these 2 bolts b/c they strip out easy, the threads inside the crankcase strip easy not the bolt. Then put the drain plugs back into the tank and into the engine. Then put about 1.5 quarts in start it for a couple seconds to get the oil pumped through the engine then put another .5 quarts in. Your done!

Anyone correct me if im wrong anywhere but i think thats it.

08-26-2008, 08:27 PM
http://www.atvriders.com/articles/oilchange400ex.html