hetrick_racing9
08-25-2008, 05:56 PM
J.Natalie 2006 National Machine
This is John Natalies machine that was not beaten during 2006 because he hardly rode it due to his wrist and being out for the season.
It Is in great condition, everything has been maintained well. Hardly any rust on bike. Frame is welded by one of my mechanics on both sides not due to frame cracking but so that we wouldnt have that problem. it is made about half a inch or a bit more thicker all around the weak points on each side, we also have a full skid plat for the bottom that is not on in this picture.
It has a national rage motor that was built for natalie and hauls the mail. We had it rebuilt at the beggining of the season and only have run 4 races on it.
Has a brand new hinson clutch plates with hinson clutch cover and full hinson clutch system. Brand new bumper is also on it. We have only run 2 races with the new tag handle bars on it.
The Machine has also been strengthen'd up on the foot peg mounts with new welds due to blingstar a-arms having a tendancy to break and the foot mounts.
New bushings and bearings are on there way right now for the swingarm.
Almost brand new front tires, rear tires have about 2 and a half races on them.
Shocks have been replaced with new ones that will suit a not so heavy rider (natalies got a few more pounds haha)
Oil and Oil Filter Changed After every 2 motos
Rage motor in this machine is not like your average rage motor because it was built for natalie. I have never blown it up and have rebuilt it remember. This machine is ready to ride for next season.
List Of Mods:
long travel suspension all around:
-50 inch front end roll design, triple rate elite elka shocks almost brand new
-Roll Design swingarm with single rate long travel elka shock and elka linkage
-dg national series bumper with mounted number plate (brand new)
- acerbis black and white handgaurds
- pro design clutch lever
- roll design steering stem
- rpm axle
-roll design carrier
-douglas beadlock rears
-douglas race rims on front
- renthal chain
-new front sprocket
- pro design airflow ring
- k&n filter
- john natalie series blingstar nerf bars
-john natalie series hmf pipe (brand new packing put inside) reason for embleme not being on but is on now
-renthal grips
-ironman original quad tech seat in great condition
- quadcross tires on front
- razr's on rear
-x generation hood
-spastic designs graphics
-stainless steal brake lines
Im sure there is more that i forgot if any other questions feel free to ask .
Pm Me A Offer . Cash and Certified checks only acceptable
Thanks.
Bunyan Racing #14
This is John Natalies machine that was not beaten during 2006 because he hardly rode it due to his wrist and being out for the season.
It Is in great condition, everything has been maintained well. Hardly any rust on bike. Frame is welded by one of my mechanics on both sides not due to frame cracking but so that we wouldnt have that problem. it is made about half a inch or a bit more thicker all around the weak points on each side, we also have a full skid plat for the bottom that is not on in this picture.
It has a national rage motor that was built for natalie and hauls the mail. We had it rebuilt at the beggining of the season and only have run 4 races on it.
Has a brand new hinson clutch plates with hinson clutch cover and full hinson clutch system. Brand new bumper is also on it. We have only run 2 races with the new tag handle bars on it.
The Machine has also been strengthen'd up on the foot peg mounts with new welds due to blingstar a-arms having a tendancy to break and the foot mounts.
New bushings and bearings are on there way right now for the swingarm.
Almost brand new front tires, rear tires have about 2 and a half races on them.
Shocks have been replaced with new ones that will suit a not so heavy rider (natalies got a few more pounds haha)
Oil and Oil Filter Changed After every 2 motos
Rage motor in this machine is not like your average rage motor because it was built for natalie. I have never blown it up and have rebuilt it remember. This machine is ready to ride for next season.
List Of Mods:
long travel suspension all around:
-50 inch front end roll design, triple rate elite elka shocks almost brand new
-Roll Design swingarm with single rate long travel elka shock and elka linkage
-dg national series bumper with mounted number plate (brand new)
- acerbis black and white handgaurds
- pro design clutch lever
- roll design steering stem
- rpm axle
-roll design carrier
-douglas beadlock rears
-douglas race rims on front
- renthal chain
-new front sprocket
- pro design airflow ring
- k&n filter
- john natalie series blingstar nerf bars
-john natalie series hmf pipe (brand new packing put inside) reason for embleme not being on but is on now
-renthal grips
-ironman original quad tech seat in great condition
- quadcross tires on front
- razr's on rear
-x generation hood
-spastic designs graphics
-stainless steal brake lines
Im sure there is more that i forgot if any other questions feel free to ask .
Pm Me A Offer . Cash and Certified checks only acceptable
Thanks.
Bunyan Racing #14