PDA

View Full Version : 350r what pipe?


GOTFEAR
08-21-2008, 09:37 PM
I have a FTZ 350 what pipe should i use. i would like lower power so i wouldn't have to use the clutch as much coming out of a corner for mx
Pro1200
08-21-2008, 10:40 PM
LRD bigbore pipe
ct350trx
08-22-2008, 03:04 AM
I have a ct350 cilinder and a cr250 ignition. I have used an lrd big bore, pt eliminator and a ct mid pipe. And the best pipe if you use a cr250 or a pvl ignition is the ct mid pipe. I tell you, you don't have to use the clutch anymore.
Aske C-leigh on the other forum. He will confirm :D
C-LEIGH RACING
08-22-2008, 04:56 PM
Originally posted by ct350trx
I have a ct350 cilinder and a cr250 ignition. I have used an lrd big bore, pt eliminator and a ct mid pipe. And the best pipe if you use a cr250 or a pvl ignition is the ct mid pipe. I tell you, you don't have to use the clutch anymore.
Aske C-leigh on the other forum. He will confirm :D

Only thing, that CT mid pipe might not match up with the top end drag output porting FTZ normally does.

If you got to fan the clutch comming out of a corner with a 350 top end, your either in the wrong gear or somethings wrong with the engine, I suspect porting.
Neil
doc-bones
08-25-2008, 06:56 AM
I have a CT midrange pipe in great condition for sale $125. shipped!
bansheeboyo
08-25-2008, 03:08 PM
see now i have the same problem but i have a ct 350 with cr 250 ignition drag ported
and am not sure what pipe to get i have a paul turner 89 race pipe will this work or what about lrd adjustable expansion chamber have been looking at them
i dont realy drag that much ,i just nip about the feilds
C-LEIGH RACING
08-25-2008, 05:11 PM
Originally posted by bansheeboyo
see now i have the same problem but i have a ct 350 with cr 250 ignition drag ported
and am not sure what pipe to get i have a paul turner 89 race pipe will this work or what about lrd adjustable expansion chamber have been looking at them
i dont realy drag that much ,i just nip about the feilds

With the drag porting, the PT 89 race is what you can use. Having drag porting kinda leaves out trying to use a bottom end pipe like the LRD or CT midrange.
You might could have just a little, with the ESR TRX5 regular, not the center mount though.
Neil