Fox evols help

[esr250r86]

Hi, I have been riding with my fox evol lt shocks and they seem really good and everything.Except they compress really bad into the corners. Ho do I fix this. without making them harder. basically, I weigh 135-140lbs with gear and everything. What should I have my evol chamber and main set at..Im currently running 140 in the evol and 45 in the main. Thanks.

[Dave400ex]

Call Toby at Moto-Xperts he can help you out. 765-230-0514

you can put mor air into your evol chamber it acts as your main spring and will stop your diving into corners

[JH Racing]

Do you still have a Holz front end? Do you have DSC if so stiffen the high speed 3-4 clicks and raise the evol to 150 lower the main to around 35.

[esr250r86]

yes,I am running the Holz front end. Thanks for the number dave,if I dont get it figured out i will call. And alright.But wont putting more air into the evol chamber make the ride very hard and stiff?

[JH Racing]

it is going to make it alittle stiffer but you should not notice it to much if you are worried about that take 3 clicks out of the low speed comp. I have been using fox/holz for almost 3 years now. One other thing you can do is have stiffer neg. spring installed most of all of the holz evols have a 80lb if you go to a 100lb you have to run more pressure in the main to have the same ride height and it does not dive as bad

[esr250r86]

I think this has the stiffer neg spring in it..hmm.alright im Going to go 150 evol main 35 and see how that feels and mess with the compression from there. I really appreciate your replies and info! Thanks.Ill let you know how it goes. Im going to the track this Sat.

[JH Racing]

No problem I hope this helps