400ex/250r part out!!!!!!!!

[j450rking]

ok so this is the fully up to date list of what i have left from my hybrid part out.

i accept paypal and postal money orders and i ship world wide it's just going to cost you to ship out of the US


250r stuff

87 long rod trx250r engine with a wiseco 265 bore kit, full cometic gaskets, ricky stator 200watt stator, tusk heavy duty clutch, nac's polished billet side cover, powdercoated esr case saver, 13tooth pro drive sprocket. it has about 25 hours on all the things listed including the bore and was most lightly trail riden. $699

esr trx5 full exhaust with 5hours on the packing and extra packing in good shape with new springs (there is one dent on the bend on the exspantion chamber $68

stock shifter powdercoated candy red in great shape $10

streamline stainless steel clutch cable like new $12

250r radiator over flow tank $5


hybrid parts

full setup to put a 250r engine in a 400ex chassis including
engine mounts,c4 products red silicone hoses, wire harness with 400ex headlight switch, gas hose,powdercoated kick lever and other things i can't think of $100 or with the exhaust $165

400ex parts

2003 frame and sub frame with papers gusseted and powdercoated stealth black by pappy and is in good shape exsept for a dent on the bottom rail that has always been there ever sense i got it when it was a month old and has never done anything bad $250 (has all stock mounts)

maier one peace red front 400ex plastic with quad tech 450r hood with grills in good shape with one melted spot by the handle bar area $50

maier red rear plastic with number plates (includes un used front plate) in good shape with no burns or anything $50

aluminum air scoops trimed to fit around radiator but still mounts to 400ex great $20

400ex seat with dmp gripper seat cover and new dmp graphicks $80

itp t-9 9'' polished wheels in great shape with maxxis razrs with about 85% tread $95

400ex spindels powdercoated candy red by pappy in great shape $45

front brake calipers with ebc brake pads powdercoated candy red by pappy (in awsome shape ) $65

ss galfer front brake lines that are silver in great shape $25

galfer red rear brake line in great shape $18

mmf rear brake master cover stainless steal polished $8

pro design clamp on dune grab bar in good shape $35

torch crom headlights with trail tech 75watt bulbs $25 (works on any quad that had original wireing)

custom led headlights (blue) with mount and wireing $20

tag big bars (silver) with renthal kelvlar grips in good shape $35

tag polished oversized bar mount for stock stem (polished) $35

greaseable swing arm bolt molycoated by pappy $25

stock 400ex gas tank in good shape $20

stock 400ex steering stem $20

stock 400ex rear shock linkage powdercoated $20

brake line clamps for stainless steel lines powdercoated red vein $10

pro armor tether kill switch in good shape $10 (will work on any quad or dirtbike)

tusk gas cap powdercoated red vein $15

stock 400ex brake pedel in great shape powdercoated candy red by pappy $25

asv c5 red pro clutch lever in great shape $45 (will work on any quad or dirtbike with a clutch)

asv c5 shorty clutch lever powdercoated candy red (new!) $30 (will work on any quad or dirtbike with a clutch)

asv 400ex and other quads blue f3 brake lever in great shape $25

stock 400ex front brake master cylinder $20

rear brake master cylinder $20

stock rear wheel hubs in great shape $25 (two sets avalible)

400ex front skii setup with plastic skiis that i made custom and have never used but it should work great and uses stock spindles (included and installed) painted black $120

[cmaxx]

torch crom headlights with trail tech 75watt bulbs $25 (works on any quad that had original wireing)

custom led headlights (blue) with mount and wireing $20


how much shipped on both of these?

[michaelopfer]

how much would shipping be for the frame and the conversion parts to 68319. what all has been done to the frame to accept the 250 engine. and pictures would be great thanx.
michael opfer

[procircuit406ex]

how much shipped for the swinger bolt

[j450rking]

Originally posted by cmaxx
torch crom headlights with trail tech 75watt bulbs $25 (works on any quad that had original wireing)

custom led headlights (blue) with mount and wireing $20


how much shipped on both of these?

$60 shipped for the lights





the frame has not been touched at all for the conversion i just made special mounts so that the engine would bolt in. it would be $415 shipped for the frame and conversion. for just the conversion it would be $130 shipped



for the swinger bolt it would be $35 shipped

[michaelopfer]

pm'd u

[trxfour50r]

will buy stem let me know 479--619-8693 thanks randy

[mooseracerX]

Still have the frame? Could you send pics to teamblackoutracing@gmail.com? Thank you.

[cdrookie]

how big is the dent in the esr pipe? ever get any pics of it?

[j450rking]

i'll have pics of the plastic asap witch will be before thursday.

i will need a zip code for shipping on the steering stem.


IF YOU WANT TO BUY SOMTHING FROM ME PLEASE TELL ME YOUR ZIP CODE SO I CAN CHECK SHIPPING!!!!!:)

[j450rking]

the dent is about 1'' by 1 1/2'' but the exhaust may be sold.

[j450rking]

frame

[yamahardr15]

I'll take the rear disk brake and hub as long as its in good condition shipped to 63026

[brusif]

could I get pics of the pro design clamp on dune grab bar to brusif@gmail.com thanks.

[liex21]

hey could you email me some pics of the steering stem wrxspeed21@hotmail.com

[loons]

Pics of the led lights please.

loons72@hotmail.com

[stevebme]

send me a pic and shipping quote on the overflow. My zip is 54968. cptnjack@charter.net is my email
thanks

[j450rking]

here is the overflow

[j450rking]

grab bar

[j450rking]

led lights

[01exrider]

How much for air shrouds shipped to 47993 Indiana?

[j450rking]

it'll be $25 shipped.

[dang400ex]

how bout a pic of the tusk gas cap and the seat with dmp cover

thanks
adam

[j450rking]

i'll have pics tomorrow.

[iownatoyota]

you say u want 95$ for those rims and tires, are those all 4 rims and tires and whats the condition of them???

if u can send a pic thanks

[Jer250R]

frame still available? can you snap a pic of the dent and a couple more general pics?
skid plates are gone already huh?
brake caliper also gone?

price shipped to Calais, ME 04619

thanks!

[j450rking]

i'll try and get some pics tomorrow.

that is just for the rear itp t-9 9'' rims and maxxis razrs but the price is now $85

[j450rking]

also i have the front calipers but the 250r rear is gone and yes the skids are all gone and shipping is going to be about $50 for the frame and i will get good pics tomorrow

[Jer250R]

ok, i call dibs on the frame pending pics, and actually if buddy doesn't want the rims and tires, i'll take those too.

[McFall]

Do you still have the pipe? If you do send pics to bmcfall3@verizon.net

[liex21]

do you have the steering stem still ? email me at wrxspeed21@hotmail.com

[j450rking]

email sent about stem. i don't have the exhaust anymore and i did take pics of the frame but i lost the camra so i have to find that wich i should today so i'll have them up some time today . sorry for the wait.

[monkeyballs]

U still have the skiis?

[michaelopfer]

will you take 600 shipped for the motor?

[j450rking]

i do still have the skiis and i will need a zip code to check shipping on the engine.

[dirtmerchant42]

what size are those rear tires??

[j450rking]

air scoops

http://s469.photobucket.com/albums/rr51/strider668/?action=view&current=airscoops.jpg

frame dent 1
http://s469.photobucket.com/albums/rr51/strider668/?action=view&current=framedent.jpg

frame dent 2

http://s469.photobucket.com/albums/rr51/strider668/?action=view&current=framedent2.jpg

and the tires are 20x11x9

[dirtmerchant42]

darn they looked kinda small, i was hopin they were 18s thanks tho..

[michaelopfer]

my zip code is 68319, but all I can dig up is $600 (my WHOLE paycheck!) thought you might of remembered me, but thats ok. you seem pretty busy, I was the one who bought all the wireing and exhaust, which by the way made it in last friday, very nicely packaged,
thanks,

[j450rking]

i remember you but i can't go to low as the engine is worth more then $600 but i need cash. i can do $650 shipped. i can hold it till next paycheck if you want.

[monkeyballs]

.

[monkeyballs]

Can I see some pics of the ski's And do you still have the air scoops?

[mpwrd3]

I will take the rear tires and wheels. Please pm me with price shipped to 41501.

Thanks

[dang400ex]

I'd like to see some pics of the 400ex dmp seat graphics and the tuck gas cap please!!!!! And how about the galfer brake lines.

thanks
Adam

[j450rking]

here are the air scoops.

[monkeyballs]

They look nice. So 20$ you say? But its international.. :-s P0M2N0 into canada. So what do you say?

[j450rking]

brake lines

[j450rking]

shipping is $18 for the air scoops.


and i'll have pics of the graphick kit and stuff by this weeked.

and here is the asv pro clutch lever that is now $45

[monkeyballs]

So why were they trimed? Then how is thins going 2 work for payments?

[j450rking]

spindles are now $45

[j450rking]

front calipers now $65 for bolth!!!!!!

[j450rking]

they were trimmed because i had them on my hybrid witch was the 400ex chassis with the 250r engine and the radiator was too wide to fit with the air scoops so i trimmed them. it's just the bottom and they still look good and it dosn't mess with air flow.

[monkeyballs]

Got any pics of them when they were on? And so how will thsi work with payments? And no offence but how do I know u sent it and all?

[j450rking]

oh and i take paypal or postal money orders. my paypal is exrider416@gmail.com

[j450rking]

i ship usps witch emails you a tracking number and i have vary good feedback on here and on ebay so you don't have to worry.

[monkeyballs]

K I still would not minde some pics of them mounted. and ur ok with international?

[j450rking]

i wouldn't have given you a shipping quote if i didn't want to ship them to canada and here is the best pic i have ov them mounted.

[monkeyballs]

They still look sexy lol. And good point.. Ill get back to you tomorow. I g2 ask my friend with the pay pall.. Well peace. so 38$ in all?

[j450rking]

another

[j450rking]

yep $38 shipped

[monkeyballs]

verry nice but I dont understand where they were trimed cuz it dont look like they were lol :-s.. And they should fit on my 02 400ex? right?

[j450rking]

they will fit your 02 and they were cut underneath were you don't see it from the outside unless you look underneath

[monkeyballs]

By how much? And so its just not going 2 cover as much engin.. But w/e right?

[dang400ex]

I want that there seat cover.....

thanks
adam

let me know. I dont really want the whole seat...and im sure you dont wanna mess with taking it off but i'll ask anyway

[jeepman]

so you still have the motor and what all done to it and how many bores left and are themm ss wheels for sale

[j450rking]

bolth the engine and wheels are sold.

theye was about a inch and a half to 2 inchs cut out of the air scoops and i smoothed out the cuts so they look good and it shouldn't afect anything at all.

i don't really want to take the cover off the seat as i won't make much for just the seat anyway but i know you can sell a stock seat for at least $20 so you could buy mine and sell yours and only be out $25 for just the seat i can take $45+shipping

[quadracer99]

pm'd :macho

[j450rking]

ok here is the updated list of what i have left from my part out.

trx 250r radiator overflow tank.

400ex parts

maier one peace red front 400ex plastic with quad tech 450r hood with grills in good shape with one melted spot by the handle bar area $50

maier red rear plastic with number plates (includes un used front plate) in good shape with no burns but has a peace cut out for a kick lever $45

aluminum air scoops trimed to fit around radiator but still mounts to 400ex great $20

400ex seat with dmp gripper seat cover and new dmp graphicks (includes seat with cover installed) $80

itp t-9 9'' polished wheels in great shape with maxxis razrs with about 85% tread $90

400ex spindels powdercoated candy red by pappy in great shape $40

front brake calipers with ebc brake pads powdercoated candy red by pappy (in awsome shape ) $55

ss galfer front brake lines that are silver in great shape $20

galfer red rear brake line in great shape $16

mmf rear brake master cover stainless steal polished $5

pro design clamp on dune grab bar in good shape $30

torch crom headlights with trail tech 75watt bulbs $20 (works on any quad or car)

custom led headlights (blue) with mount and wireing $20

tag big bars (silver) with renthal kevlar grips in good shape $30

tag polished oversized bar mount for stock stem (polished) $30

greaseable swing arm bolt molycoated by pappy $25

stock 400ex gas tank in good shape $20

stock 400ex steering stem $18

stock 400ex rear shock linkage powdercoated $20

brake line clamps for stainless steel lines powdercoated red vein $8

pro armor tether kill switch in good shape $10 (will work on any quad or dirtbike)

tusk gas cap powdercoated red vein $15

stock 400ex brake pedel in great shape powdercoated candy red by pappy $20

asv c5 red pro clutch lever in great shape $45 (will work on any quad or dirtbike with a clutch)

asv c5 shorty clutch lever powdercoated candy red (new!) $30 (will work on any quad or dirtbike with a clutch)

asv 400ex and other quads blue f3 brake lever in great shape $20

stock 400ex front brake master cylinder with powdercoated cap $20

rear brake master cylinder $20

stock rear wheel hubs in great shape $25 (two sets avalible)

400ex front skii setup with plastic skiis that i made custom and have never used but it should work great and uses stock spindles (included and installed) painted black $110

i do ship outside the US but it will cost! i take paypal and postal money orders. i normaly ship usps priority witch would get to you within 5 days after payment.

[bbender85]

$20 shipped for the stock 400ex stem, paypal.

[j450rking]

$30 shipped for the stem

[bbender85]

alright that works. i'll get back with you later today.

[bbender85]

if you'll PM me your paypal addy i'll send payment as soon as i see it. thanks..

[jeepman]

Hey you still have them lights i want both sets of them if they both work ill paypal u the money right now if u give me ur address if the lights work

[5084Jr]

Give me a price for the front master cylinder and rear hubs (one set) shipped to 63129.
Had a little roll over and the front cylinder took the brunt of the hit...

[j450rking]

trx 250r radiator overflow tank.

400ex parts

maier one peace red front 400ex plastic with quad tech 450r hood with grills in good shape with one melted spot by the handle bar area $50

maier red rear plastic with number plates (includes un used front plate) in good shape with no burns but has a peace cut out for a kick lever $45

400ex seat with dmp gripper seat cover and new dmp graphicks (includes seat with cover installed) $80

front brake calipers with ebc brake pads powdercoated candy red by pappy (in awsome shape ) $55

galfer red rear brake line in great shape $16

mmf rear brake master cover stainless steal polished $5

pro design clamp on dune grab bar in good shape $30

torch crom headlights with trail tech 75watt bulbs $20 (works on any quad or car)

custom led headlights (blue) with mount and wireing $20

greaseable swing arm bolt molycoated by pappy $25

stock 400ex gas tank in good shape $20

stock 400ex rear shock linkage powdercoated $20

brake line clamps for stainless steel lines powdercoated red vein $8

pro armor tether kill switch in good shape $10 (will work on any quad or dirtbike)

tusk gas cap powdercoated red vein $15

stock 400ex brake pedel in great shape powdercoated candy red by pappy $20

asv 400ex and other quads blue f3 brake lever in great shape $20

stock 400ex front brake master cylinder with powdercoated cap $20

rear brake master cylinder $20

stock rear wheel hubs in great shape $25 (two sets avalible)

400ex front skii brackets made with stock spindles (included) and should work great but i have never tryed them. dose not come with skiis $40

i do ship outside the US but it will cost! i take paypal and postal money orders. i normaly ship usps priority witch would get to you within 5 days after payment.

[j450rking]

IS IS THE FULLY UPDATED LIST UP TO 10/2/08 PLEASE DON'T ASK IF I HAVE ANYTHING ELSE AS I DO NOT


250r stuff


250r radiator over flow tank $5

400ex parts

400ex seat with dmp gripper seat cover and new dmp graphicks $80

front brake calipers with ebc brake pads powdercoated candy red by pappy (in awsome shape ) $60

galfer red rear brake line in great shape $15

mmf rear brake master cover stainless steal polished $8

pro design clamp on dune grab bar in good shape $35

custom led headlights (blue) with mount and wireing $20

greaseable swing arm bolt molycoated by pappy $25

stock 400ex gas tank in good shape $20

stock 400ex rear shock linkage powdercoated $20

brake line clamps for stainless steel lines powdercoated red vein $10

tusk gas cap powdercoated red vein $15

stock 400ex brake pedel in great shape powdercoated candy red by pappy $25

asv 400ex and other quads blue f3 brake lever in great shape $25

stock 400ex front brake master cylinder $20

rear brake master cylinder $20

stock rear wheel hubs in great shape $25

skii mounting brackes made with stock spindles to mount snowmobile skiis to the front of the ex. (will also fr 250r) $30



KODAK EASY SHARE C813 8.1MP CAMERA WITH 3X OPTICAL ZOOM IMAGE STABLIZATION AND A 2.5'' SCREEN, IN GREAT SHAPE TAKEN ABOUT 15-20 PICS WITH IT BUT I NEED CASH. I LOST THE USB CABLE FOR IT BUT YOU CAN GET A CARD READER OR GET A CABLE AT WALMART FOR LIKE $4 $80

MICROSOFT 4000 OPTICAL MOUSE WITH RECEIVER IN GRAT SHAPE USED ONE TIME $29

JENNINGS BUCKMASTER SINGLE CAM COMPOUND BOW SETUP FOR 30'' PULL AND 70LB. GREAT BOW AND I WOULD KEEP IT BUT THE PULL WAS TO LONG AS I'M VARY SHORT (COMES WITH 3 ARROW QWIVER AND RELEASE $180.


WILL GET PICS TOMORROW OF EVERYTHING

[iownatoyota]

can u get me a pic of the gascap and the rear master cylinder cover?