chain tighening wrench

[tomscarpt]

Bought my raptor and theres no book. Is there a wrench to tighen the chain after you losen the 4 pinch bolts.I really do not want to use a pipe wrench. Have the allen wrench in the tool kit just wondering if the axle wrench should be with it also.Had a 350x in it had the tool from the factory.Any ideas?

[ccdhowell]

Take a look at the sprocket side of the bearing carrier. You'll see some about 10mm holes in the side of the bearing carrier. Put a bar of somekind bar in the hole and push the quad forward. The sprocket hub will contact the bar and rotate eccentric bearing carrier. If I remember right, push forward to loosen the chain, pull the quad backward to tighten the chain. It's really the easyest chain to adjust on any quad I've ever had. Hollar again if you still can't get it after this second-rate write-up.

Chris

[tomscarpt]

Thanks for the help it worked great.Excellent info to know

[tomscarpt]

Thanks for the help it worked great.Excellent info to know

[tomscarpt]

Thanks for the help it worked great.Excellent info to know