need help with stalling problem

[meankfx]

the quad idles fine but when i give it gas it dies right out. I cleaned the carb and it still does the same thing. I was thinking it could be the rev box or the t.p.s. sensor. What do u guys think? Anything I could try?

[airmobile101]

Has it been re-jetted as of late? Got some history and mods of the bike? When does it die? At low,mid, and hight throttle position. More info please!!

[meankfx]

its got a full yoshi pipe and its been jeted one time that was when i put the pipe on. it dies as soon as u touch the throttle. not like a bogging die but like a cut out and shut off die. i was jumping my steel ramp when it happend and as soon as i landed thats when it started acting up. it runs so good at idle but as soon as you touch the throttle it dies.

[airmobile101]

Check your carb boot and air filter boot. Mine started to do that crap when it came loose. Also, wouldnt hurt to try another cdi box if avalible.

[justin1022]

Originally posted by airmobile101
Check your carb boot and air filter boot. Mine started to do that crap when it came loose. Also, wouldnt hurt to try another cdi box if avalible.

x2 check the boots happend on my ex several times. and maybe try a diffrent cdi i dont really think that would be it though unless dirty.

[bellzbub]

if it is not the boots then check your float level. the float has been known to go out of adjustment when landing hard.

[meankfx]

i put a new wire harness on it. and messed with my choke and now it runs fine

[airmobile101]

Good deal,but a wire harness would have been one of the last things I would have tried.

[meankfx]

i had a extra one laying around because i had problems with my cdi box connector. I thinkl that might have been the problem but not sure cause it still did it after i put it on. started working fine after i messwd ith the choke.