StupidHurts
08-14-2008, 01:18 PM
White and Black
Race cut Front Plastics
Rear XC Holeshots 60%
Front XC Holeshots 80%
K&N Filter
FMF Fatty Pipe with Powercore 2(I cut it down to make it look and sound like an FMF Shorty)
Bore 40 Over
Ported and Polished
Last Owner said the Head was shaved but i dont think it is so im not going to say it is
New Boyesen Power Reeds
Reed Spacer
Carb was just cleaned and main jet was replaced with a 250
New 13 Tooth JT Sproket
Good Rear sproket with Good Chain
Bad:
Last owner bent right A-arm and tried to cut and weld it and messed it all up
Bent Tie rod
No Back Brakes
I bought this when it was just about a basket case
I fixed most of the problems
Got it running and cleaned the carb
Im looking to get something bigger again like a 250R hybrid or Z400,400EX,Maybe 300EX, Pretty much anything with alot of torque...I might be able to add cash..Looking for something that might need work..
Not sure what to ask so just make some offers and if i can get enough for it the way it sits then ill sell it...
Should have pics up tonight
Race cut Front Plastics
Rear XC Holeshots 60%
Front XC Holeshots 80%
K&N Filter
FMF Fatty Pipe with Powercore 2(I cut it down to make it look and sound like an FMF Shorty)
Bore 40 Over
Ported and Polished
Last Owner said the Head was shaved but i dont think it is so im not going to say it is
New Boyesen Power Reeds
Reed Spacer
Carb was just cleaned and main jet was replaced with a 250
New 13 Tooth JT Sproket
Good Rear sproket with Good Chain
Bad:
Last owner bent right A-arm and tried to cut and weld it and messed it all up
Bent Tie rod
No Back Brakes
I bought this when it was just about a basket case
I fixed most of the problems
Got it running and cleaned the carb
Im looking to get something bigger again like a 250R hybrid or Z400,400EX,Maybe 300EX, Pretty much anything with alot of torque...I might be able to add cash..Looking for something that might need work..
Not sure what to ask so just make some offers and if i can get enough for it the way it sits then ill sell it...
Should have pics up tonight