Need Honda Part # for oil seal

[quad2xtreme]

This is the one behind the front sprocket. I've looked at all the microfiche and just can't seem to find it.

Thanks for any help.

[drew416ex]

OIL SEAL (25X35X5)
91203-KCY-671

Its listed in the transmission section.

[quad2xtreme]

Originally posted by drew416ex
OIL SEAL (25X35X5)
91203-KCY-671

Its listed in the transmission section.

Thanks so much. I looked right past it. Funny thing is this wasn't the 1st time I tried to find it.

I assume this is a fairly easy seal to pop out and replace. I am hoping the shaft doesn't have a groove worn in where a new seal isn't going to fix the problem.

[drew416ex]

Its very easy with the case split, but with it together it will be a little more difficult but it should be doable.

[quad2xtreme]

Originally posted by drew416ex
Its very easy with the case split, but with it together it will be a little more difficult but it should be doable.

Yikes, I thought I could just pop it out like a swingarm carrier or front hub seal. Well, I least you've set my expectations for some trouble.

[leasureryan]

all you have to do is run 2 tiny self tapper drywall screws into the seal, and pull it out. Easy trick so you don't have to split the case. If it's visable....it's doable....lol

[quad2xtreme]

Sounds like a good idea. Thanks.

[dustin_j]

You can also just pull it out with a pick, then just push the new one in