View Full Version : Need Honda Part # for oil seal
quad2xtreme
08-12-2008, 10:03 AM
This is the one behind the front sprocket. I've looked at all the microfiche and just can't seem to find it.
Thanks for any help.
drew416ex
08-12-2008, 06:01 PM
OIL SEAL (25X35X5)
91203-KCY-671
Its listed in the transmission section.
quad2xtreme
08-12-2008, 08:55 PM
Originally posted by drew416ex
OIL SEAL (25X35X5)
91203-KCY-671
Its listed in the transmission section.
Thanks so much. I looked right past it. Funny thing is this wasn't the 1st time I tried to find it.
I assume this is a fairly easy seal to pop out and replace. I am hoping the shaft doesn't have a groove worn in where a new seal isn't going to fix the problem.
drew416ex
08-12-2008, 09:04 PM
Its very easy with the case split, but with it together it will be a little more difficult but it should be doable.
quad2xtreme
08-12-2008, 09:42 PM
Originally posted by drew416ex
Its very easy with the case split, but with it together it will be a little more difficult but it should be doable.
Yikes, I thought I could just pop it out like a swingarm carrier or front hub seal. Well, I least you've set my expectations for some trouble.
leasureryan
08-12-2008, 10:43 PM
all you have to do is run 2 tiny self tapper drywall screws into the seal, and pull it out. Easy trick so you don't have to split the case. If it's visable....it's doable....lol
quad2xtreme
08-13-2008, 02:43 AM
Sounds like a good idea. Thanks.
dustin_j
08-13-2008, 07:36 AM
You can also just pull it out with a pick, then just push the new one in
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.