View Full Version : Removing wireing harness
Nichols Atvs
08-03-2008, 07:03 PM
Who has the wireing stuff wrote down im missing something got no spark . had it before i took it out. im forgetting something simple im sure.
wvspeedfreak
08-03-2008, 07:50 PM
CDI wires:
orange-coil
black/red-stator
white/red-stator
black-ground
black/white-ground
I always run an extra ground from the engine to the frame as well.
Nichols Atvs
08-03-2008, 08:01 PM
I did not ground the black white wire wonder if thats the problem. Where are you puting your teather cord .
wvspeedfreak
08-03-2008, 08:26 PM
The black/white one needs grounded.With the tether I just put one side grounded to the frame and the other tapped into the orange coil wire.
bulldogfallon
08-04-2008, 05:37 AM
http://yhst-17379619078614.stores.yahoo.net/wihaby.html
We keep this info in our tech section for future reference
Nichols Atvs
08-04-2008, 07:19 PM
Grounded black white wire she fired up thanks for the second head every one
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.