300ex plastic ?

[Honda4life05]

Im goin to relocate my ignition an the neutral light on the side plastics. I kno u need to drill a 1 inch hole for the ignition but it seems like it will spin if you try to twist it. An for the neutral light a 5/8's looks to be the right size is this right? is the side plastic the same thickness as the headlight plastic?

[atvnut22]

i now for the key you will have to notch the hole, and im pretty sure the side is thicker. theirs a whole post on this in the how tos, i read it the other day just to pick up some info. hope i was a help
Brock

[graham300ex]

the key will not twist because there should be a little notch on it that you will have to file your plastic after drilling the hole out and then it wont rotate. I didnt worry about the neutral and reverse light i mean how many times do u realy look at them haha. i can post pics tommorow if you wish

[Honda4life05]

yah im not gonna mount the reverse just the neutral. Iv poped the cluth thinking i was in neutal several times lol. but if you could post thoes pics that would be great. thanx.

[atvnut22]

http://www.exriders.com/vbb/showthread.php?s=&threadid=313111

[cam300ex]

some airplane glue works great to stop the spinnin worked great on mine