PDA

View Full Version : Question About Hard Starting



bobbys9350
07-29-2008, 04:05 PM
Hey guys, I was jsut wondering if anyone had any ideas to help me get my quad to start easier. Its an 06 with the following mods:

Venom 12.25 piston
HC Stage 2
slip on
Open airbox
quickshot 2 acc pump cover

#48 pilot
can't remeber the main
CRF needle on 3rd clip
#55 leak


when i crank it crank fine for a couple of seconds the bucks and acts like it locks up then it cranks fine then bucks, almost like its loading up with fuel. The whole starting system just actls like its coming apart in there.......


My valves are dead on and the decompression lever is set at .50mm with no feeler gauge under the exhaust rocker.

Any help would be greatly appreciated!!!! Thanks!

bobbys9350
07-29-2008, 06:32 PM
Anyone?

bobbys9350
07-29-2008, 07:10 PM
Anyone?

bobbys9350
07-30-2008, 04:02 PM
Anyone!!!! Im sick of this!

tfuchs
07-30-2008, 04:48 PM
Just a suggetion, I have had to adjust my decomp with a different than stock cam...also have you replaced the starter clutch?

bobbys9350
07-30-2008, 08:43 PM
yep twice

tfuchs
07-30-2008, 10:10 PM
try to Tighten up the decompression gap

bobbys9350
07-31-2008, 02:18 PM
I did and it doesn't seem to get any better....

dpizz450
07-31-2008, 06:17 PM
i know my cousin just had to replace something it his starter. something about the one way bearing or somethin.

also ive heard these ER's arent the easiest things to start....

TRX450RACER174
07-31-2008, 06:28 PM
Mine starts great:D