PC Directions

[Drewltr450]

Does anyone have a link or pics on how to install a powercomander on the ltr i lost my directions.

[450Rchaser]

I can tell you how. dont have the instructions though. Unplug white connector on on top of the throttle body. Plug PC up w/ black connector that look just like the white one you disconnected. Plug the factory white connector into the smaller black connector coming from PC. I will have to go and look at mine to see what color wire you piggy back on the throttle position sensor. And run your ground to a bolt on the case.

[Drewltr450]

i understand were the 2 main plugs go but the blue like clamp wire im confused about.

[450Rchaser]

you will use that clamp on the yellow wire coming off your throttle position sensr and the other side should be connected to the PC and it will just slide over the clamp.
Instructions straight from powercommander.com:
http://www.powercommander.com/downloads/329/install/411/eng329-411.pdf

[Drewltr450]

PERFECT!!! thats exactly what i was looking for thanks again.