Hinson Clutch Basket Installation

[1krazyquadridr]

I'm doing some research on instaling a Hinson clutch basket. What I'm noticing is that it appears that you have to remove and re-install the dampner and gear on the back of the stock basket. Has anyone done this, or have the instructions they could post?

[86 Quad R]

you'll need to remove the three factory rivets that are holding the clutch and all together. ideally you should do this on a drill press to make things easier.

the new basket will have threaded holes and the corisponding hardware for re-assembly and be sure to use lock tite when going back together.

on a side note........... be sure and inspect the cushions while ya have it down. making sure that they are in good shape and arent distortd or cracking up.