Can you make a 07 single a arm a dual a arm

[pnbsdad]

Is it possible to make a 07 single a arm a dual a arm and how much you think it would cost?

[markvette]

bottoms will bolt right on. you will have to weld on mounts for the top a-arms. i put a set of drr dual a-arms on an xtreme tanyrum frame a while back. project is still in progress but a-arms are on it.

Mark

[Nichols Atvs]

Yes Call Dave Carter . But you are better off buing a new dual a arm in the long run You will need alot of new parts

[markvette]

xtreme tantrum frame, drr dual a-arms, apex spindles, 400ex hubs, tie rods and brake calipers, 300 ex front shocks. built mostly from parts i had laying around. about ready to get started back on it and finish it up. right now i am almost with a total rebuild on a 300ex.

Mark

http://i114.photobucket.com/albums/n246/quaddad1958/100_2794.jpg

[Logan #34's Dad]

If your going to race it then do not weld anything to the frame. That will put you in the mod class. IMO the best set up I've ever seen for the conversion is the Rath Racing bolt on set up. But they are very very expensive.