LSR +2s, laeger swing arm and elkas for 250r

[88mxR]

I just bought a narrow front end, CR500 link 250r frame, so I will be needing to swap some stuff. All parts are from a 1988 250r, front end may work for other hondas.

LSR +2s powder coated black. New ball joints and bushings, coming soon. - $350


Elka triple rate zps std travel front shocks, 160lbs mx - $450
http://s185.photobucket.com/albums/x100/88mxr/?action=view&current=100_3307.jpg

Laeger swing arm -2? (I can measure if needed, I actually liked it better than stock length) black epoxy - $350
http://s185.photobucket.com/albums/x100/88mxr/?action=view&current=100_3317.jpg

Elka zps rear shock with protective gold titanium nitride coating on shaft, 180lbs mx - $475
http://s185.photobucket.com/albums/x100/88mxr/?action=view&current=100_3315.jpg
http://s185.photobucket.com/albums/x100/88mxr/?action=view&current=100_3314.jpg

e-mail (mitchp@uni.edu), PM or call 319-404-7029 for any questions/offers.

I would be willing to trade toward a +3 long travel front end, preferably elkas and durable arms that can accept stock spindles or similar (ex. not t-pin).

[04TRX400EX]

PM sent.

Will the shocks and/or arms fit a 400EX as well?

[IMSROLL450R]

Originally posted by 04TRX400EX
PM sent.

Will the shocks and/or arms fit a 400EX as well?

Yes they will. Good deal on a front end right there..........

[88mxR]

Here's a picture of my arms that I dug up:
http://s185.photobucket.com/albums/x100/88mxr/?action=view&current=100_2371.jpg

[250Renvy]

Hey dude, I have a set of long travel elkas I'd be interested in trading.

I have a CR500 link rear shock and LT quad rate fronts.

Look up my post in parts for sale.

[69camarodoyle]

do you still have the front elkas and how long is it from center of the eye to center of the eye

[88mxR]

Elka fronts - around 16.5" eye to eye
Laeger Swing Arm - around 17.25" center to center

[69camarodoyle]

are you payin for shiping and will you take $400 for the fronts

[69camarodoyle]

man im really interested in your elkas can i have your number please my email is joshadoyle@hotmail.com

[400ex28]

Whats the length of the front shocks?

[88mxR]

Here is a couple more of the front elkas:

http://s185.photobucket.com/albums/x100/88mxr/?action=view&current=100_3309.jpg
http://s185.photobucket.com/albums/x100/88mxr/?action=view&current=100_3308.jpg

Here is a picture of the arms:

http://s185.photobucket.com/albums/x100/88mxr/?action=view&current=100_3327.jpg

Right now I have enough good bushings for the arms, but they are half black and half white. I have ordered them from LSR before and they were too loose. Since then, I have made my own out of the same material and they work much better. I haven't had time lately to use the lathe at work, so I don't have a complete set of white bushings. I have enough bushings to work, but I can get them all in the same color with a little time.

[88mxR]

The elkas, swing arm, and some new +2 burgard a-arms are listed on ebay
http://motors.shop.ebay.com/merchant/mpatterson86

I still have the LSR +2s and an almost complete 86 250r roller, PM if interested.