PDA

View Full Version : Warrior won't acclerate



Busted Warrior
07-03-2008, 01:43 PM
I just got my warrior back together and I was riding it and it gets so far in the rpm and it just brakes up. Popping and just sputters. Also when you are ideling and give a good thumb worth it just bogs bad. I know its in the carb but any suggestions on what else could be wrong and what might be wrong with the carb?
Thanks

Clay200X
07-03-2008, 07:02 PM
try adjusting your air/fuel needle
i had a 3 wheeler that was jist like that

andre7276
07-03-2008, 08:34 PM
check the parking brake there's a rev limiter on the clutch perch for the parking brake

Busted Warrior
07-03-2008, 11:55 PM
Ok is the air fuel needle the bigger screw with the spring? Sorry Im not that fimilar with these carbs.
Thanks

Also the parking brake is long gone but I do have a sensor off the clutch perch.

CSR400EX
07-04-2008, 09:48 PM
the bigger screw with the spring is the idle screw lol. leave that alone. your air/fuel screw is on the bottom of the carb, its a brass screw.

trx310R#24
07-05-2008, 12:24 AM
if its not the fuel/air its a leak in between the carb an head

John451
07-09-2008, 04:22 PM
Yeah, check to make sure the carb boot is tightened to the cylinder. Make sure there arent any cracks or dry rotting on the boot check to see if the clamp is tight. Why did you have it apart?

Busted Warrior
07-09-2008, 05:08 PM
I wasn't getting any fuel through the carb. The thing wouldn't even sputter. Im getting my new exhaust thursday and when I put that on Im gonna do some fine tuning.