Bore Help

[phs17]

if i have a 416 piston at 11:1 what else do i need to get it bore. and what other "goodies" will work with it

[rideracelivemx7]

your pretty much all set once you get the cylinder machined to accept the 416 piston. you dont just dump it in there obv. but you can always match a bore with a new cam or a nice new slip on. every little bit helps and you feel it all. are you getting a kit or ordering seperate? becauses theres the head gasket. base gaset. the 4 valve cover o-rings cam chain tensioner gasket and of course the piston and rings. but if your doing a bore kit. a jet kit is usually a deffinet. or youll fight the hog to run right. jet kits are usually 50-60$ and have detailed instructions

[phs17]

i have a jet kit already. so i would have to get it rejetted right ?. and should i jus buy the kit and if i do wat else would i need

[rideracelivemx7]

well most of the pistons come in kits. go to jciracing.com or ebay and they have 415 ktis 416 kits 440 kits. everything you need to go. if you have the jet kit. i belive hornetgod has the 416 kit also so you can ask him what hes running for his jet kit. he knows his stuff.