PDA

View Full Version : Where can I get new rocker arms?


Steven
12-02-2002, 06:40 PM
Where can I get new rocker arms?

The OEM rockers are about $85 for the 4. Does anybody else sell a good replacement that are perhaps hardened?

Thanks, Steve.
Dave400ex
12-02-2002, 07:12 PM
Are your stock ones junk you have now? If they aren't just have then hardfaced.
Steven
12-04-2002, 05:39 PM
three are ok, and one is pretty bad
Dave400ex
12-04-2002, 08:19 PM
Well check out like Service Honda or a Honda dealer. They should be able to get you some. Are they just old and wore down? You may want to have the new ones hardfaced.
shook
12-04-2002, 08:37 PM
Service Honda shipped all 4 for like $ 90.00
TRXRacer1
12-04-2002, 08:38 PM
I belive web cam can help you out too.
L.Vegas400
12-05-2002, 03:44 AM
should i get hard faced rockers with a 416? if so where and how much can i expect to spend?
Dave400ex
12-05-2002, 07:01 AM
What kind of Cam do you have?
cjpoole1
12-05-2002, 07:10 AM
this is some info off of Powroll's site:

ANY aftermarket camshaft for the 400EX will cause your stock rockers to wear quickly! The RFVC head design increases stress on the cam and rockers as the cam lift and duration increase, meaning that hardweld rockers are the only way to prevent premature wear to your rockers and camshaft!