D Bergstrom
06-30-2008, 07:43 PM
I have the following parts off my 450R for sale. (These are off 2004/2005 machines, may fit other years.)
Elka quad rate piggybacks, preload and comp adjust only shocks used on Houser +2.5" LT arms. 19 7/8" eye to eye. Bought brand new at the begining of 2005. Sent to TCS (Now Race Tech.) to be revalved/serviced at the end of 2006. TCS installed high flow pistons and revalved, set up for 225 lb expert desert racer. Used for three races at the begining of 2007, replaced with Elka Elites and have been stored in a box in a closet in my house for the last year. The resivours are pretty chipped up from roost, but the shocks were always used with shock covers, so springs, shafts, sealls etc are in good shape. SOLD!!!
I have two Houser +2 stems, black. Both are staright with just a few minor chips, rub marks in powder coat. One has some very slight groves where the top bushing sits, while the other the groves are worse. (The stock bushing has two ridges and this is what the wear was from.) Neither one had any play when installed, I did not notice anything with them until I removed them and inspected. Both have been SOLD!!!!
Two SRP Sure-Loc Axle Nuts. One has a few good rocks dings, while the other has more. Both work fine but are just a little rough. Waiting on payment for the better one and the other is SOLD!!!
Alba racing gripper seat cover. Brand new, never used. I run Quad Tech tall seat foam, and this one will not work. Black on top, red/black on sides with Honda on the sides. $40 shipped.
If you give me a e-mail address, I can send you some pics of anything. Will accept paypal only. Any questions, let me know.
Thanks,
Doug
Elka quad rate piggybacks, preload and comp adjust only shocks used on Houser +2.5" LT arms. 19 7/8" eye to eye. Bought brand new at the begining of 2005. Sent to TCS (Now Race Tech.) to be revalved/serviced at the end of 2006. TCS installed high flow pistons and revalved, set up for 225 lb expert desert racer. Used for three races at the begining of 2007, replaced with Elka Elites and have been stored in a box in a closet in my house for the last year. The resivours are pretty chipped up from roost, but the shocks were always used with shock covers, so springs, shafts, sealls etc are in good shape. SOLD!!!
I have two Houser +2 stems, black. Both are staright with just a few minor chips, rub marks in powder coat. One has some very slight groves where the top bushing sits, while the other the groves are worse. (The stock bushing has two ridges and this is what the wear was from.) Neither one had any play when installed, I did not notice anything with them until I removed them and inspected. Both have been SOLD!!!!
Two SRP Sure-Loc Axle Nuts. One has a few good rocks dings, while the other has more. Both work fine but are just a little rough. Waiting on payment for the better one and the other is SOLD!!!
Alba racing gripper seat cover. Brand new, never used. I run Quad Tech tall seat foam, and this one will not work. Black on top, red/black on sides with Honda on the sides. $40 shipped.
If you give me a e-mail address, I can send you some pics of anything. Will accept paypal only. Any questions, let me know.
Thanks,
Doug