will a 15th tooth fit?

[Honda4life05]

i was waonderig if it would fit because i currently have a 14 t on an i can easily push that. I have the stock 38 tooth rear an i kno i could decrease that but i want a cheap way to get more speed. an if i didnt like it i would only be out like 12 bucks.ohh and im not running a case saver. thanks for help.

[Honda4life05]

ohh almost forgot, who sells them?

[honda300EXtreme]

i do believe that the guys running 15 tooth fronts had to clearance there case to accomodate the sprocket,,

i think you'd be better off trying a smaller rear, i mean you can go clear down to a 33 tooth

[Honda4life05]

ok thanks for the info..yah i was just looking for a cheap way to get the top speed..do u kno of any very cheap rear sprockets for the 300?

[honda300EXtreme]

not sure about that one, i know sunstar sprockets are reasonably priced, and last long

there may also be some on this site selling the sprocket your looking for

or contact colby at C&D racing and ask him, hell find ya the one ya want cheap

[01exrider 281]

yea you will need to make some more room for the chain to clearence the cases. i am running a 14 and i had to take off that case saver. dont like the idea myself. also what size tires are you running?

[Honda4life05]

im runnin 20 in.

[atv70x]

Just bought a 15 tooth on ebay, it fits, but there is almost no clearance. Makes me nervous.

[01exrider 281]

i would go lower in the rear. try like a 33 then you can keep your case save and no clearence problems with the front.

[Honda4life05]

yah i think ill jus stick with a 14 tooth up front. i wansnt able to find any rears lower than 36 teeth. i also have a new stock 13 teeth an i will put that on if i can find a new case saver an find a rear sprocket below 36 teeth. please leave website if you have found any. thanks