Bunch of 300EX stuff.

[300ex73]

Well, I've finally decided that I'm just going to sell off just about everything I have that was left over from my 300EX.

Right now I'm looking at selling these parts.

Burgards +5 LT a-arms, with extra balljoints and some extra bushings

ITP T9 GP rims, 4-1 offset (these are brand new, never used)

Elka 16.25 inch front shocks (setup for the Burgards front susp.) Triple rate, piggyback res, comp and rebound adjustable.

Elka 300EX length shock, SSD, remote res, comp and rebound adjustable

Lonestar Axcalibar +2/+4 axle, anti-fade locknut

Possibly the Maier plastics if the price is right, but I'll only sell them as a whole (front, rear, hood, tank cover, and seat)

These parts have been cleaned up, boxed, and stored ever since I tore down the quad, so there are in very good or excellent shape. These parts were always well cared for and maintained, so they show little or no wear, with the exception of some rubbing marks on the lowest part of the front suspension.

I don't always have as much time to get on here as I'd like to, but I'll do my best to keep things updated. I'll also try to get some pics as soon as I can.

For now I'm including a picture of the quad to give an idea of the parts.

[300ex73]

Here's a shot showing the front suspension.

[cmaxx]

prices?

[yamahabluebruin]

What weight are the shocks setup for? How much $$$$

[SHEE300]

Is that front bumper for sale if so you got the back one also, and is the 300ex length shock a rear if so how much, let me know or pm me. thanks

[300ex73]

I'm not listing prices. If you're interested in any of the parts I've listed, just make me a decent offer.

The shocks say they're valved for a 190-220 lbs rider, but I think that's a little off. I weighed about 150-160 when I rode on them, and they felt a little bit of the soft side.

Please note that the front shocks are setup for use with a long travel front suspension.

The rear shock is a 300ex standard length. Although it allows for far more wheel travel.

And the front bumper isn't up for sale, but I do have the grab bar, which is also an AC piece.

[300ex73]

Here's a pic of the front shocks.

[300ex73]

Here's a pic of the rear shock.

[250Renvy]

Check pm's

[300ex73]

Still have all the stuff up for sale.

Please keep in mind when inquiring about a a price or making an offer, that this stuff is in excellent condition. The plastics are the only part that have accumulated any real riding time, but they're still very much scuff free, and look very new.

[sparks427]

hey man whats the bottom dollar on the axel and stuff?

[Project300]

how much for the grab bar? and is it in good shape?

thanks

[Needmorehp]

Axle, carrier, etc.... How much?

[sparks427]

your inbox is full bud, and i need ur info for the money order for the axle. and the price that ur wanting.

[300ex73]

Just cleaned out my inbox, so I can receive pm's again.

The grab bar is in decent shape, pm me for a price.

Axle is sold. Msg me for prices on anything else.

[hondarider101]

how much for the bars and grips on them? no pad .

[300ex73]

The handlebars are already sold. The only things that are up for sale right now are the ones listed. I do update the list whenever something is sold.

[rich1257]

What year is your 300?? and do you still have the plastics ??

[newbs-R-us]

Do you have a rear master cylinder?

[300ex73]

The quad was originally a '97, and yes I still have the plastics.

And I should still have the rear master cylinder somewhere.

[wellsj54]

what kind of seat cover is that and do you know if it will go on a 250x?

[g9901920]

would you take 200 for the shocks?

[300ex73]

The seat is a stock pan with Ceet hard foam, and an NStyle gripper seat cover. And yes it would fit a 250X.

And definitely a no on the shocks.

[wellsj54]

How much shipped for the seat man? Im in Indiana as well.

[AGPallstar109]

you have a pm on the rear shock

[hondaboy587]

how much for everything but the motor?

[hondaboy587]

how much for everything but the motor?

[dirtdawg]

those rears wheels will fit stock hubs, right? how much would you want for 'em, $125?

[300ex73]

Idk what you mean by "everything but the motor" but there are things I'm not going to sell from it. This is because I'm not comfortable selling parts that have been damaged to the point of being able to still do their function safely. If you know what kind of parts you're actually looking for then pm me.

As for the wheels. The only rear wheels I have would be the stock Honda wheels. The ITP wheels I have for sale are fronts.

Again, if any of you are interested in a part, send me a pm. As of currently, the list is up to date. And if you need a picture of a part to determine its shape, just ask.

[mitchgncc711]

how much for the rear shock

[300ex73]

If you want to discuss prices on anything, pm me.

[stuntin andy]

how much for the wheels and tires and back brake calaper?

[06yfz450mxer]

hey how much would u take for the curtis sparks full exhaust shiped to 13367

[300ex73]

I'll have to get back to you on that. I disassembled the pipe to get the core rechromed (had a problem with some of the chrome flaking off of the tip) and haven't taken the time to finish it or put it back together.

[yamahaboy47]

ok because im really interested

[ca69396]

do you still have the plastic and seat if you do how much?:D

[IRISH-RACER-14]

Originally posted by 300ex73
Well, I've finally decided that I'm just going to sell off just about everything I have that was left over from my 300EX.

Right now I'm looking at selling these parts.

Burgards +5 LT a-arms, with extra balljoints and some extra bushings

ITP T9 GP rims, 4-1 offset (these are brand new, never used)

Elka 16.25 inch front shocks (setup for the Burgards front susp.) Triple rate, piggyback res, comp and rebound adjustable.

Elka 300EX length shock, SSD, remote res, comp and rebound adjustable

Lonestar Axcalibar +2/+4 axle, anti-fade locknut

Possibly the Maier plastics if the price is right, but I'll only sell them as a whole (front, rear, hood, tank cover, and seat)

These parts have been cleaned up, boxed, and stored ever since I tore down the quad, so there are in very good or excellent shape. These parts were always well cared for and maintained, so they show little or no wear, with the exception of some rubbing marks on the lowest part of the front suspension.

I don't always have as much time to get on here as I'd like to, but I'll do my best to keep things updated. I'll also try to get some pics as soon as I can.

For now I'm including a picture of the quad to give an idea of the parts.

whats left. seeing as this thread is 2 years old

[ca69396]

I like the plastic, what brand was it and what was it off of?

Thanks

[300ex73]

The only thing I've sold so far has been the rear shock. So everything else that's listed is still available.

I may add more parts to the list later, but for now those are the main ones that I'm going to try to get rid of.

All the plastics are from Maier. The rear is the stock style front. The front is also the stock style, but has been heavily modified. The hood is a modified 250R style. I went the route I did, because I'd had the Maier racing style front and rear set, but was really unhappy with the fit and look. These look much cleaner and fit very well.

[yamahaboy47]

would u take 200 shiped for the pipe full system