teather switch help ASAP

[ride red 14]

i have an 05 450r and i need to put my teather on it. Which wires shoulc i connect to? Any help would be appreciated

thanks, Austin

There are 4 wires coming out of the ignition switch. A green, black. red and a black with a white stripe.

If you are getting rid of the key switch the cut it off close to the switch and leave a lot of wire hanging. You splice the green wire to the wire on the kill switch that comes out of the metal part of the kill switch. Then you splice the black with a white stripe to the wire that comes out of the plunger on the kill switch. You MUST splice the 2 remaining wire together (red and black) to make the fan, lights and carb heater to work.

If you are keeping the key switch, just splice into the green and black with a white stripe as stated above.

[ride red 14]

did exactly what you said and it was easy thanks alot for your help

Originally posted by ride red 14
did exactly what you said and it was easy thanks alot for your help

You're welcome.