PDA

View Full Version : Air Box Lid


sheriff525
06-25-2008, 12:39 AM
I was just thinking of some ways to modify my airbox lid and I thought I would first ask what others have done.

Please list and add a picture of your mods to your lid or airbox.

I think it will be interesting to see what everyone has done.
sheriff525
06-25-2008, 06:03 PM
Too late. I had some steam I had to blow off so I did this. From what I can tell the air will come right up and into it from below.

I will be doing more but this is the start
sheriff525
06-25-2008, 06:04 PM
I did both sides
SSJEFF
06-25-2008, 07:46 PM
http://i246.photobucket.com/albums/gg101/outlawjeff/07OUTLAW525LE/PC030022.jpg
http://i246.photobucket.com/albums/gg101/outlawjeff/07OUTLAW525LE/PC030023.jpg
sheriff525
06-25-2008, 10:22 PM
Jeff where did you get that or did you make it yourself. I was going to try and fabricate something just like that. Super Cool. Does it give you that throaty sound as if the cover was off?
sleddog66
06-26-2008, 07:06 AM
You can buy them like jeffs at EHS Racing, but he made his
SSJEFF
06-26-2008, 02:25 PM
My pipe is so loud i do not hear the intake. I made this. Just bought material for a banshee and cut it.
TRENT_G
06-26-2008, 05:08 PM
Here's mine,
TRENT_G
06-26-2008, 05:09 PM
one more,
sheriff525
06-26-2008, 11:01 PM
Hey Trent, looks cool! What kind of media did you use?
marshviewripper
06-27-2008, 04:30 PM
im assuming these intakes are all on 525irs models? anyone come up with something for the 525S yet?
Rig
06-28-2008, 03:10 PM
I did the same thing as Trent. Just used a hole saw then siliconed Flow-Rite from startinglineproducts.com to the underside. I know they have various size sheets you can buy but I can't find it on their site, so give them a call.
TRENT_G
06-29-2008, 07:05 PM
Hey sheriff 525, I used a heavy duty metal screen from home depot and a glue gun. After 6 months it's still holding good, and my filter seems to be keeping pretty clean. Cost $5.00
rlozer
07-02-2008, 09:33 AM
Here is mine. Made a template and laser cut it out of stainless.
SPRKSHW
07-24-2008, 03:37 PM
Do any of you guys have a problem with the seat pan getting chewed up by the bolts sticking up through the lid? I have an EHS kit that I havent put on yet but I realized that when I pulled the lid off and tried to ride it the damn seat kept coming loose so obviously it is supported to a point by the lid. I'm just trying to decide if it worth modifying or just it setting back up for the lid and leaving it alone.