Warrior rear suspension rebuild

[ettev]

How difficult are the following to do on a Yammy Warrior?

1) Install new rear axle bearings
2) Install new swingarm bearings

Shop work only or can the fairly educated weekend mechanic do these? How many hours of time can I expect to spend if I do it?

[John451]

Originally posted by ettev
How difficult are the following to do on a Yammy Warrior?

1) Install new rear axle bearings
2) Install new swingarm bearings

Shop work only or can the fairly educated weekend mechanic do these? How many hours of time can I expect to spend if I do it?

I would believe that you could problably do it on your own. I did both myself without a manual. But i've been workin on bikes and quads for 9 years. It's fairly simple. I'd say if all goes well, maybe an hour and a half at the most. I've done em in under an hour.

[ettev]

John451,
Thank you.

[John451]

No problem. Good luck!

[400exrider707]

If it's your first time doing carrier bearings, be prepared to get aggrivated. Make sure to use heat!