PDA

View Full Version : Valve adjust feeler gauge size


hypersnyper6947
06-20-2008, 01:23 PM
What size feeler gauge do i use for my valves intake and exhaust?
06-20-2008, 02:02 PM
.004 and .005
REDRIDDER
06-20-2008, 07:22 PM
Originally posted by FoxHondaRider
.004 and .005 incorrect that is for the stock cam... i think he has a stg 2 hot cam, at least it says so in his sig. but the correct valve lash should be .005 on the intake and .006 on the exhaust or .13mm and .15mm
06-20-2008, 07:31 PM
Originally posted by REDRIDDER
incorrect that is for the stock cam... i think he has a stg 2 hot cam, at least it says so in his sig. but the correct valve lash should be .005 on the intake and .006 on the exhaust or .13mm and .15mm

sorry did not realize that he didnt say
brokenmike
06-20-2008, 08:10 PM
Now the question is, does he have a old or new style hot cam. The clearances are different.

old in .15mm ex .20mm
new in .13mm ex .15mm
hypersnyper6947
06-20-2008, 11:34 PM
I have the new cam. I just did the adjusting, i think it went well. Its kind of hard to be confident with that. Its really awkward trying to get your feeler down there. What can i look for when i start it tom. to know if i did it correctly or not?