400ex swingarm pivot bolt help

[dezertboyjd]

hey everyone..i still need more help on removing the rest of the pivot bolt from my 400ex. i cut the swingarm off and finally got the motor out of the frame. all that is left now is the bolt and spacers that go between the motor and swingarm. look at the pic and tell me what else i can do to get this out before i pay a machine shop to do it.

im thinking i should try and cut the spacers off..but i dont know what to do if its siezed in the motor itself.

all help is appreciated!

[wicked-ride]

just cut the bolt as close to the motor as you can..the bolt is stuck on the bushings not the motor...those pivot bolts seize up inside those bushings...load it with anti seize when you put a new one in.