PDA

View Full Version : Yoshimura Big Bore Ltr500 Pro Level Quad Pep Walsh Rath


motomadman
06-17-2008, 03:20 PM
This is a LTR450 with less than 10 total Hours on Bike. Motor build has less than 1 hour run time and most aftermarket parts have less than 6 hours. The head and cams were built for former Suzuki/ Yoshimura factory rider Russel Shumacher and all porting and machine work was done by Ryan Cox. It sits on top of a Athena 500 kit. Fastest best handling quad I have ever ridden. Has never been rolled or so much as bumped, never raced but ready for any track. I am in Southern Illinois. $10,500 cash Thanks


Engine: Athena 500 kit, Pro Yoshimura custom head w/ oversize Ti valves done by Ryan Cox (This is not the headwork you get when you send in your head). Yoshimura STR exhaust cam and custom Yoshimura intake cam, Yoshimura PIM/ FIMAK, Yoshimura full Titanium exhaust w/ o2 bung and plug, Fuel intake

Suspension: Walsh A-arms, Walsh +1 stem, PEP Big Bottle 8 clicker shocks front and rear set up for 200lbs MX, Precision stabilizer.

Lonestar axle, hubs, sprocket hub, brake hub, locknut, bearing carrier.

Rath Monster peg nerfs, front bumper, grab bar.

Quadtech seat

Flexx bars

Hiper fronts, MXR6 all the way around

Works pro elite levers and MUCH MORE I can't remember

http://s307.photobucket.com/albums/nn304/moto-madman/?action=view&current=LTR1.jpg

http://s307.photobucket.com/albums/nn304/moto-madman/?action=view&current=LTR2.jpg

http://s307.photobucket.com/albums/nn304/moto-madman/?action=view&current=LTR3.jpg

http://s307.photobucket.com/albums/nn304/moto-madman/?action=view&current=LTR4.jpg

http://s307.photobucket.com/albums/nn304/moto-madman/?action=view&current=LTR5.jpg

http://s307.photobucket.com/albums/nn304/moto-madman/?action=view&current=LTR6.jpg

http://s307.photobucket.com/albums/nn304/moto-madman/?action=view&current=LTR7.jpg
motomadman
06-21-2008, 11:46 AM
Bump
motomadman
06-26-2008, 12:25 PM
$10,000
motomadman
10-07-2008, 08:05 PM
Still available
motomadman
10-18-2008, 06:39 PM
bump
motomadman
10-21-2008, 03:32 PM
I'll take $9000 CASH
motomadman
10-23-2008, 06:39 PM
Bump
motomadman
10-27-2008, 04:21 PM
Bump
motomadman
10-30-2008, 05:57 PM
$8500 CASH ROCK BOTTOM PRICE


It will kill me to part this quad. But If I sell the motor, its getting torn down. I can't believe someone is not jumping all over this.


$3300 Shipped for the motor
motomadman
11-02-2008, 04:40 PM
Bump
ltrracer
11-05-2008, 12:16 PM
where at in so il are u? i also live in so il and i am interested
motomadman
11-05-2008, 06:35 PM
PM SENT
logangsxr998
11-05-2008, 06:45 PM
Any idea what it dynos at?
motomadman
11-07-2008, 06:50 PM
Never been on a dyno. I'm sure 60+ hp and around 40lbs of torque. The low end is awesome.
logangsxr998
11-07-2008, 06:57 PM
Where are you located?
motomadman
11-08-2008, 12:16 PM
Southern Illinois an hour from STL
motomadman
11-13-2008, 03:22 PM
Bump
logangsxr998
11-13-2008, 09:55 PM
what does BUMP mean?
Kawi_41
11-14-2008, 12:13 AM
Originally posted by logangsxr998
what does BUMP mean?

meaning bump the thread to the top of the page so people will still see it.
motomadman
11-17-2008, 06:23 AM
BUMP
Master LTR450
11-22-2008, 08:23 AM
cash only?
QuadRid3r442
11-22-2008, 03:55 PM
price is still too high(not being mean just my opinion) theres mint 450's that go for 5000 hands down. just a pointer.
QUADSQUAD7
11-23-2008, 03:48 PM
Originally posted by QuadRid3r442
price is still too high(not being mean just my opinion) theres mint 450's that go for 5000 hands down. just a pointer.
I totally disagree. If you found a 450 for $5k or even less it is not going to be the same caliber of a quad like this and you would end up spending a lot more $ after getting the quad cheap and putting these parts on it. I have nearly $30k invested in mine and I there is no way anyone could buy an LTR for $4k and do the work to it I have on my bike and spend less then what I'm asking for it. On top of the fact everything is brand new.
logangsxr998
01-18-2009, 12:03 PM
This bike still forsale?
TRXman86
01-19-2009, 01:25 AM
Originally posted by QuadRid3r442
price is still too high(not being mean just my opinion) theres mint 450's that go for 5000 hands down. just a pointer.

I dont agree either. Hell I had a 400ex I put over 10k into. Didnt seel for that cause it was an EX, but if it was a 450 I could have easily gotten 7 out of it or more. And it was full blown MX monster...
450Racer372
01-20-2009, 10:36 PM
I dont agree as well...while i think youll never get 9-10 g's for it(not because its not worth it...but because people just dont have that money to spend nowadays)........your gonna get more then 5 for it...id say 7500-8000 is what youll end up getting...its sad...seeing such nice machines not selling. But a major loss is to be expected dumping that much money into a quad then selling it...youd be wise to bite the bullet and part it out....make more money that way......i think soo at least.

Well in anyways, BUMP