DG bumper mounting on Scrambler 50/90?

[dwhst9]

I ordered a DG bumper for our Scramber 90 (same as the 50 chassis) and it doesn't bolt up? The bottom will bolt up, but the top is no where near bolting to the stock upper mounts. Am I missing something here??????

[dwhst9]

Will a Predator bumper work on a Scrambler?

[manco47]

Yes the predtor bumper well work but you have to bend the bottom mounts in a little and bolt it up and then bend down the top a little to line up. I have done this to four of our scramblers, cause it was the only ones around. Its not hard to do, I've done it by hand with know problems. Good luck

[dwhst9]

Originally posted by manco47
Yes the predtor bumper well work but you have to bend the bottom mounts in a little and bolt it up and then bend down the top a little to line up. I have done this to four of our scramblers, cause it was the only ones around. Its not hard to do, I've done it by hand with know problems. Good luck

Do you have the part# for the bumpers you've used?

[manco47]

I got them from Dennis Kirk it's for the 03-06 Predator # 51-4100 - phone is 1-800-969-7601. They have two styles to chose from the other is a V # 51-4130.

[dwhst9]

Originally posted by manco47
I got them from Dennis Kirk it's for the 03-06 Predator # 51-4100 - phone is 1-800-969-7601. They have two styles to chose from the other is a V # 51-4130.

Thanks! I'm returning the one I have now and getting the 1st one you listed. It looks pretty similar to the one on my Sport 400.