LONG-ROD
06-15-2008, 02:42 PM
I picked up a cylinder and sent it to DRI to have it fitted for a piston and found out it is a 300cc sleeve in a stock cylinder, they bored it to 67.5 mm and sent me a 1.4 mm head gasket, 19cc dome. Luaren did a mild port job mainly bringing it back to stock then a little he said. They told me to run a 188 main and 58 piolet and DGH 4th clip. He said I must run vp c12 . I wanted to run 50/50 due to cost but Lenny said no way she will get to hot and blow due to the massive sleeve. Any one else have a set up like this and if so what do you run. I also have a ct 310 and both have pwk 39 on them and I am running a 182 main DGH needle and 50 piolet and it is running good so I am thinking I am going to be way rich on the other. Oh the 310 is on its last bore and running 50/50 with vp c12, Just want to here what some of you think. another note the Duncan motor has pyrmid reeds and pills pipe and silencer and ct motor has V Force 2 reeds and procurcit pipe.