Help !!!!!!

[quad12dad]

Can anyone tell me the thread size for the nut that hold the clutch
on the shaft i stripped mine out and have been unable to find the
right size thanks for any help.

[Logan #34's Dad]

I believe a #10, 1.25 thread. Go to your nearest nut n bolt place and buy a couple 1.50 and 1.25 thread. You may have to grind the bell nut down and make it thinner so it does not catch the bell as it rotates. The one you don't use will work on the variator.

[bulldogfallon]

We stock them if you can't find one that works


Which nut.....The large nut that holds the clutch on or the smaller nut that holds the bell on?

[quad12dad]

Its the small one that holds the bell on then the little o-ring goes on i had Hetrick send me some but the dont seem to fit did not want to force it on

[neveready]

If this is who I think?? I told you and mike I had whatever you guys needed at the mudpit they called a race on friday. I carry most things you'll need to these races in our trailer. When I offered our help you guys didn't act as if you needed it and turned away. :ermm: I have this nut here in stock, had it with me then. You just need to let us know if you need something. We are always willing and happy to help as we just enjoy watching these kids get to race.

[quad12dad]

i did not know i had the wrong one untill last night if i had known
friday night i would have asked you

[neveready]

just let us know if you ever need anything and we'll be glad to help. If you need this nut let me know and I'll get it to you. We'll see you guys next wednesday:cool:

[Nichols Atvs]

Its a m10 1.00 rear clutch the front is a M 10 1.25 I just put new ones on this morning .