Any ideas welcome.

[MikeMan]

I have just replace my plastics on my2001 trx 400 and have done away with the stock headlights. Now I have a huge gaping ugly hole where they were. Any ideas as to what I can do to make this area look a little more attractive? All ideas welcome in advance.

[mooseracerX]

TRX 250r hood. Mine should be getting here tomorrow finally. Heres a picture of the broken Quad Tech I have on mine right now.
<a href="http://s163.photobucket.com/albums/t296/racequad450/?action=view&current=221990-R1-03-2A_004.jpg" target="_blank"><img src="http://i163.photobucket.com/albums/t296/racequad450/221990-R1-03-2A_004.jpg" border="0" alt="Photobucket"></a>

[MikeMan]

Sweet ride mooseracer -- So let me get this straight. You got a hood from a trx250 r. How do these hoods fit onto the atv -- I've never put one on before.

Thanks for the advice

[mooseracerX]

Thank you very much. Alright once you got the hole in the hood like you do, you get the hood and pretty much drill a few holes and you put it on. The carbon one I got we had to sand down the sides because it wouldn't fit close to the plastic. I've herd the 250r hood pretty much bolts right up. We used 1/4" bolts to hole mine on. I'd say go order one I got mine for cheap.
Here's the one I ordered. Just make sure you choose scooped if you want the one in that picture.
http://www.goldenwestcycle.com/productinfo_item_305-dc_527.htm
:) :cool:

[hjmdoo]

You could always put pink duct tape over it and write your name on the tape with a sharpie..... Or you could draw pictures on it with markers....