Need Answr Quick About A-arms!!!!

[Drewltr450]

my friend is thinking about buying +3 a-arms and he thinks that its plus 3 inches on each a-arms so he thinks all together it will be plus 6 inches is this true???

[Honda5]

yes it is 3" on each side.

[ohsobad_chevy]

Yes, +3 on a arms is +3 on each arm (+6 total) but +4 axle is +4 total. Just throwin that out there.

[k4f5x0r]

not from what ive been researching +3 from what i read is + 1.5 ON EACH SIDE. adding to 3 INCHES ALL AROUND. NOT 3 inches on one side.

Proof. stock quad is 46 inches wide. +3 a arms and a 4-1 offset puts it at 50 inches wide

http://www.walshrc.com/shop/index.php?main_page=product_info&products_id=4

[Drewltr450]

http://www.walshrc.com/shop/index.php?main_page=product_info&products_id=4
yea im agreeing with him^^^ idk im so confused lol

[Honda5]

sorry your wrong.

[Drewltr450]

yea i relize that lol i blive you guys K4F5X0 is going crazy like IM RIGHT IM RIGHT i agree with you guys lol

[k4f5x0r]

yea sorry guys i was confused/ but im still confused with the walsh a arms.

Originally posted by k4f5x0r
not from what ive been researching +3 from what i read is + 1.5 ON EACH SIDE. adding to 3 INCHES ALL AROUND. NOT 3 inches on one side.

Proof. stock quad is 46 inches wide. +3 a arms and a 4-1 offset puts it at 50 inches wide

http://www.walshrc.com/shop/index.php?main_page=product_info&products_id=4


46 inches + 6 inches = 52 inches - 1 inch(left 4-1 wheel) - 1 inch(right 4-1) inch = 50 inches. Your proof prooves you are wrong.

[k4f5x0r]

LOL i you proved that i proved myself wrong haha. well i was familiar with offsets so my bad guys :o

Good to know cause i have been planning this in the future to make it 2 inches wider over all. So id get +1 a arms and +2 axle correct?

[bradley300]

or you could get +2 a-arms and 4+1 offset wheels, thats a better set up than +1 a-arms alone

[ohsobad_chevy]

Originally posted by bradley300
or you could get +2 a-arms and 4+1 offset wheels, thats a better set up than +1 a-arms alone

Much better handling with this combo. ;)

[mx1791]

am i the only one who feels no difference in 3-2s over 4-1s?

[400exrider707]

Originally posted by mx1791
am i the only one who feels no difference in 3-2s over 4-1s?

It's not a huge difference, but it is a difference. Your suspension/a-arm setup will probably also play into this. Also note, that some wheels may advertise 4:1 but are NOT a true 4:1.;)

[bradley300]

Originally posted by mx1791
am i the only one who feels no difference in 3-2s over 4-1s?

its not much, but it is better. you will really notice the difference if you get used to 4+1. then switch back to 3+2

[400exrider707]

Originally posted by bradley300
its not much, but it is better. you will really notice the difference if you get used to 4+1. then switch back to 3+2

Exactly, it's like using a set of flexx bars, they dont seem to make much of a difference, until you go back to standard bars...

[trx310R#24]

Originally posted by k4f5x0r
LOL i you proved that i proved myself wrong haha.

lol