PDA

View Full Version : tt parts i need help???



matt581yfz450
06-09-2008, 11:25 AM
i need some help on what to get for tt racing? i'm just going to try to do 1 or 2 racess this year because i race motocross and dont want to spend alot of money. just the stuff i have to have.

thanks

RedneckRacing18
06-09-2008, 12:12 PM
Since You Have A MX Setup You Can Just Buy Flat Track Tires, That Should Work For Ya, If Im Not Mistaking, If You Have Your Rear End A Little High You Can Probally Buy A Linkage Bar And Lower It Some

honda4life72
06-09-2008, 01:34 PM
flat track tires and a sway bar will get you by. pm me and i can get you a very good deal on a alsome swaybar.

matt581yfz450
06-09-2008, 04:27 PM
thanks guys! I talked to Goodman at red bud a couple of weeks ago and he said i might be to wide if i lower it in the front because it like 48 inches right now? is that true?

RedneckRacing18
06-09-2008, 04:35 PM
I Dont Think So I Might Be Wrong If They Changed Itd But Dont Think They Did? It's Been 50 Inches Since I've Been Racing

matt581yfz450
06-09-2008, 05:38 PM
sounds good thanks again! so that bar will work with +3 a-arms?

matt581yfz450
06-10-2008, 08:30 AM
pmed you

patrickj75
06-10-2008, 02:18 PM
If you lower +3's you'll probably be too wide. The closer the a-arms get to being parallel with the ground the wider the front width gets.

I have some 10x10 rear Hipers for sale if you need any....

norrisboat
06-10-2008, 04:16 PM
What size rims and tires would be the optimum setup for tt? Thanks

matt581yfz450
06-10-2008, 04:29 PM
so that bar will not work with +3 a-arms right?

patrickj75
06-10-2008, 07:45 PM
Originally posted by norrisboat
What size rims and tires would be the optimum setup for tt? Thanks

up front with a wider front end a 10x5 4+1 offset would work good. out back either a 10x9 or 10x10.

patrickj75
06-10-2008, 07:46 PM
Originally posted by matt581yfz450
so that bar will not work with +3 a-arms right?

if you're running a long travel front end you'd need a wider swaybar like what Rath Racing sells. they're 24" wide to work around the longer shocks.

matt581yfz450
06-11-2008, 05:53 PM
thanks