i still have no fire

[ranger505]

i still cant find why there is no fire on my banshee i checked everything from my sstator to my cdi box .well i did find there where 2 wires a black and yellow and a black wire just hanging on the harness accourding to the manuel they are the throttle switch wires i tried to ground the wires and nothing i put a 12 volt tester to one of the wires and when i pushed the throttle the light turned on but i dont no where to plug them in to i think thats why there is no fire please help

[NickG5755]

thats for your tors system.. if its unplugged it shouldnt matter

its supposed to plug into the top of your carb

[nazztman4739]

i have had mad problems with this i found its always a broken wire somewhere usually from cdi to the stator or alot of the time check the plugs where they plug together maybe one of the connectors arent connecting

[Dustin075]

I had the same problem. What i did was remove the little box on the left front side, it is for the tors bull crap. I remove it and it fired right up.