PDA

View Full Version : liquid gasket ??



hypersnyper6947
06-04-2008, 04:45 PM
Has anyone used liquid gasket for there RH (clutch side) crankcase gasket? I heard it should work just fine but I wanted a few extra opinions.

CGriff
06-04-2008, 05:05 PM
i used liquid gasket on my throtle assembly and havent been able to get the cover back off since.

hypersnyper6947
06-04-2008, 05:17 PM
That sucks...

My buddy used it on his raptor 660 on his crankcase and it worked, although i dont know if he has tried to get it off yet.

drew416ex
06-04-2008, 08:45 PM
I did but it still had the paper gasket stuck to it. I wouldnt do it on something like that because of clearance issues unless its like mine with the paper gasket still on it.

blaaze416
06-05-2008, 07:10 AM
Did it on my 406. It worked fine for three months. When i went to replace my timing chain later, the cover came right back off with just a little manipulation and a few taps with a dead blow hammer. I replaced the liquid gasket with paper at that time, and the liquid gasket was easier to get off the case than the old paper was! Though I trust the paper more. ;)