jetting hmf exhaust

[whc]

put an hmf on an 06 300ex jetted it with the supplied jets, also has a kn filter with the top of the box open, runs good on top but am getting some skipping off the bottom. any suggestions. the jetting kit did not have a different low speed jet. thanks Mild Bill

[honda300EXtreme]

sounds to me like your good on your main jet,

i would go to a 40 pilot and drop the needle one notch and see where you stand...

[whc]

thanks for input, I was figuring I would have to raise the needle but was not sure about the jet. will get one ordered