View Full Version : eldebrock carb for 450r
humdinger
06-01-2008, 04:13 PM
Who's done this and was it worth it? Tell me all of the pros and cons of doing this mod to my buddies 450r?
Thanks, Michael
Benjithx
06-01-2008, 04:22 PM
I would go with a CRF FCR carb if you were looking to upgrade.
I think others will tell you the same
d3ktrix
06-01-2008, 05:02 PM
Originally posted by Benjithx
I would go with a CRF FCR carb if you were looking to upgrade.
I think others will tell you the same
Agreed
Benjithx
06-01-2008, 05:19 PM
Infact, D3 is going to fly out and Jet Project Black for us:devil:
humdinger
06-02-2008, 02:54 PM
So where's the best place and how much for it? How many MM are these CRF FCR carbs? Do they just bolt right up or is there and thing else you might need?
Thanks, Michael
Originally posted by Benjithx
I would go with a CRF FCR carb if you were looking to upgrade.
I think others will tell you the same
desratt
06-02-2008, 06:11 PM
I love the edelbrocks. been using them since I was racing a 400ex in 2000.
humdinger
06-02-2008, 07:52 PM
So I'm guessing that you have it on your 450r now, how does it compair to the stock FRC carb? How many MM is your edelbrock?
CR500rider
06-02-2008, 08:31 PM
Originally posted by desratt
I love the edelbrocks. been using them since I was racing a 400ex in 2000.
you mean Edelbrock actually make a carb worth paying for? Thier automotive carbs are JUNK.
pro-rider46
06-02-2008, 08:45 PM
i would also say that the CRF FCR is the BEST carb available for 450rs, you can bore them out as well to make them 43mm, and the crfs are 40mm but make more HP than the stock 42mm.
humdinger
06-03-2008, 02:37 PM
Originally posted by pro-rider46
i would also say that the CRF FCR is the BEST carb available for 450rs, you can bore them out as well to make them 43mm, and the crfs are 40mm but make more HP than the stock 42mm.
Where is the beat place to buy them? Who does the bore job on them? Can they be bought with this bore job to make them a 43mm all in one shot? Where can you just get a stock on for my 400ex, or do they not work on them too?
Thanks, Michael
pro-rider46
06-03-2008, 03:41 PM
Originally posted by humdinger
Where is the beat place to buy them? Who does the bore job on them? Can they be bought with this bore job to make them a 43mm all in one shot? Where can you just get a stock on for my 400ex, or do they not work on them too?
Thanks, Michael
chad from DRG can get one for you, bore and then send it to you, but if your putting one on a 400ex i wouldnt do it, it would be around 800 dollars to do it all. you can get a stock 400ex one from service honda for about 110, but if i was you i would just buy a new one from a 04/05 450r and put it on your 400ex, they run about 140 from service honda. i may be parting out my 05 450r so if you need a excellent condition carb i may sell mine, but i do not know for sure i am going to part it out, but i will in a few days.
-Steve
humdinger
06-03-2008, 03:49 PM
Originally posted by pro-rider46
chad from DRG can get one for you, bore and then send it to you, but if your putting one on a 400ex i wouldnt do it, it would be around 800 dollars to do it all. you can get a stock 400ex one from service honda for about 110, but if i was you i would just buy a new one from a 04/05 450r and put it on your 400ex, they run about 140 from service honda. i may be parting out my 05 450r so if you need a excellent condition carb i may sell mine, but i do not know for sure i am going to part it out, but i will in a few days.
-Steve
Thanks Steve for the info on Chad from DRG, do you have their # or are the a sponsor here? Or is this them:
http://www.chad502ex.com/index_files/porting.htm
I was thinking about a 450r carb for my 400ex, let me know if your going to get rid of your and how much?
Michael
desratt
06-04-2008, 06:14 PM
edelbrock is 40mm
http://www.edelbrock.com/offroad/mc/carburetors/intro.shtml
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.