PDA

View Full Version : Elka 19.25 LT DSC quad rate shocks



m_mcgranahan
05-21-2008, 06:52 PM
The quad I just bought came with nice set of top of the line ELka shocks. As the title says, they have quadruple rate springs, high speed and low speed compression adjust as well as rebound adjust. They are in good shape overall, but do have some small rust spots on the springs. I need to sell thesee to help with a truck purchase. They measure 19.25 from the center of one eylet to the other. They show no signs of leaking and the shafts show no signs of wear.

These should be an easy fit on the 400ex and with a little work they will fit on the TRX450. They also fit Cannondale quads.

I would like to get $875 for the set OBO.

I hope you have a great day.

God bless...

Mark

m_mcgranahan
05-21-2008, 06:59 PM
Here's a pic of the high speed and low speed compression adjusters.

Also, the bottom spacers should bolt right into the 400ex and the trx450, but the top spacers have to be trimmed or swapped out to fit in the frame mount. (these fit so long as you have long travel front a-arms.

These bolt right up to Cannondale quads with long travel front ends.


God bless...

Mark

m_mcgranahan
05-23-2008, 12:50 AM
Hi,

I found out that these are valved for a 260lb MX rider on +3 a-arms.

God bless...

Mark

m_mcgranahan
06-02-2008, 10:47 PM
Shocks are sold.