PDA

View Full Version : Helpp! Unistall Pipe and Header.!


atvmaster0927
05-14-2008, 06:34 PM
How do i take off my pipe and header. I can take off my yoshi pipe. But how do i take out the header.????? Im trying to put the stock pipe and header on.

Can someone guide me through this?

Also, what jets do i need if i am going back to stock filter and stock pipe and header? motor is all stock.


thanks in advance.
jrafter
05-14-2008, 07:41 PM
make sure the head pipe goes between the frame
BigBore24
05-14-2008, 08:58 PM
to take the headpipe off there should be 4 nuts that hold it onto the head. stock jetting is 148 main and 38 pilot
atvmaster0927
05-15-2008, 04:32 AM
ok, thanks. I took a look before and it like they are connected into the transemission, i believe...or what ever it is. How do i get it out of there???
atvmaster0927
05-15-2008, 10:06 AM
Nobody knows how how to do this? i find that unbelieveable. lol
LeGaCyGiAnT124
05-15-2008, 10:13 AM
They are 4 studs that the header is connected to. I think they are 14mm but I'm not certain. Just loosen them and it will come off. Take it out from the clutch side.
atvmaster0927
05-15-2008, 03:00 PM
Ok, can someone please HELP ME!

How do i remove the pipe from the header? there is some wierd "bolt screw" thing. how do i get it off???????
05-15-2008, 03:04 PM
Please don't tell me you have no idea how to take an exhaust pipe off. It is not very hard take the nuts off and angle it a little bit and just use common sense.
lilhouskey
05-15-2008, 03:45 PM
WOW! put the wrench down before you hurt yourself.

Loosen the clamp where the pipe and header are connected and pull it apart. Its probly gonna take some pretty solid pulling to get it apart.
05-15-2008, 04:23 PM
Yea man it is not too hard it isn't like you are putting an engine back togather here you are just simply taking off a pipe.
atvmaster0927
05-15-2008, 04:50 PM
lol im not an idiot. its just some wierd *** bolt
Pipeless416
05-15-2008, 04:53 PM
put the wrench on the bolts... turn the wrench. theres not much else to say.. you should definitely buy a manual, or bring it to a shop if you're having troubles taking off the pipe.
atvmaster0927
05-15-2008, 06:25 PM
lmao it wasnt a bolt though, but i got it. hahaha
BigBore24
05-15-2008, 07:04 PM
Originally posted by atvmaster0927
lmao it wasnt a bolt though, but i got it. hahaha

im glad you got it. good to see you have a good sense of humor