painting anything or everything

[Butters]

would it make a difference if you spray paint a part and then put it in an oven. i don't mean like a normal oven i mean like high temp ones?

[Pappy]

yeah it would burn the paint!!!

spray paint should be applied ideally at 70 degress air temp and low humidity. a heated and well ventalated garage will work fine....just let it dry all the way before ya mess with it.

[KP's lil'300]

most likely what will happen if you do this with normal spray paint is that it will burn off! KP

[KP's lil'300]

papster you replied too soon.

[Butters]

oh so it won't help. what kinda paint could i use on my pegs that would last long, besides powdercoat? i know the top will wear but what about the rest.

[KP's lil'300]

just do a good primer then your paint of choice then several (4) coats of clear and it should stay pretty good. KP

[Pappy]

strip them to bare metal using paint stripper

take a wire wheel and get them spotless

use a good quality primer and apply 2 coats ....letting each coat dry

then apply a good quality top coat....dont put heavy coats on....and let dry atleast 20 minutes between coats.

then apply a coat or two of clear and yer done:p

[Butters]

ok well i was thinking about doing them black like stock. the black paint i have is industrial strenght, and has done good on my homemade skid plate.

[Butters]

alright thanks for the help. i didn't even think about clear coat. but i have a can so i'll use it.